[1] |
杜强. 雷达天线风载特性的数值计算方法及应用研究[D]. 成都:电子科技大学, 2011. Du Qiang. Research and application on numerical method for characteristic computation of wind loads on radar antennas[D]. Chengdu:University of Electronic Science and Technology of China, 2011. (in Chinese)
|
[2] |
王丽君, 佟丽莉. 地面雷达天线罩风载下的数值模拟与风洞试验研究[J]. 工程力学, 2016, 33(增刊1):283-289. Wang Lijun, Tong Lili. Numerical simulation and wind tunnel test on ground radar radome under wind load[J]. Engineering Mechanics, 2016, 33(Suppl 1):283-289.(in Chinese)
|
[3] |
穆雪峰, 姚卫星, 余雄庆, 等. 多学科设计优化中常用代理模型的研究[J]. 计算力学学报, 2005, 22(5):608-612. Mu Xuefeng, Yao Weixing, Yu Xiongqing, et al. A survey of surrogate models used in MDO[J]. Chinese Journal of Computational Mechanics, 2005, 22(5):608-612. (in Chinese)
|
[4] |
Knill D L, Giunta A A, Baker C A, et al. Response surface models combining linear and euler aerodynamics for supersonic transport design[J]. Journal of Aircraft, 1999, 36(1):75-86.
|
[5] |
Unal R, Lepsch R, McMillin M. Response surface model building and multidisciplinary optimization using D-optimal designs[C]//7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, 1998:4759.
|
[6] |
Fleming E, Lafleur J, Saleh J. Response surface equations for expendable launch vehicle payload capability[C]//AIAA SPACE 2009 Conference & Exposition, 2009:6656.
|
[7] |
陈力波, 黄才贵, 谷音. 基于改进响应面法的公路简支梁桥地震易损性分析[J]. 工程力学, 2018, 35(4):208-218. Chen Libo, Huang Caigui, Gu Yin. Seismic vulnerability analysis of simply supported highway bridges based on an improved response surface method[J]. Engineering Mechanics, 2018, 35(4):208-218. (in Chinese)
|
[8] |
韩建平, 骆勇鹏, 郑沛娟, 等. 基于响应面的刚构-连续组合梁桥有限元模型修正[J]. 工程力学, 2013, 30(12):85-90. Han Jianping, Luo Yongpeng, Zheng Peijuan, et al. Finite element model updating for a rigid frame-continuous girders bridge based on response surface method[J]. Engineering Mechanics, 2013, 30(12):85-90. (in Chinese)
|
[9] |
费庆国, 韩晓林, 苏鹤玲. 响应面有限元模型修正的实现与应用[J]. 振动、测试与诊断, 2010, 30(2):132-134. Fei Qingguo, Han Xiaolin, Su Heling. Response surface based finite element model updating and its application[J]. Journal of Vibration, Measurement & Diagnosis, 2010, 30(2):132-134. (in Chinese)
|
[10] |
程霄翔, 费庆国, 何顶顶, 等. 基于响应面的大型输电塔结构有限元模型动力修正[J]. 振动与冲击, 2011, 30(5):116-122. Cheng Xiaoxiang, Fei Qingguo, He Dingding, et al. Dynamic updating of a large transmission tower's finite element model based on response surface methodology[J]. Journal of Vibration and Shock, 2011, 30(5):116-122. (in Chinese)
|
[11] |
鲍诺, 王春洁. 基于响应面优化的结构有限元模型修正[J]. 北京航空航天大学学报, 2014, 40(7):927-933. Bao Nuo, Wang Chunjie. Structural finite element model updating based on response surface optimization[J]. Journal of Beijing University of Aeronautics and Astronautics, 2014, 40(7):927-933. (in Chinese)
|
[12] |
董彦鹏, 吕振华. 基于蜂窝材料结构相似有限元模型的夹层结构抗爆炸冲击特性优化设计分析[J]. 工程力学, 2013, 30(7):248-254. Dong Yanpeng, Lü Zhenhua. Analysis and optimization of blast-resistant sandwich structure utilizing structural similar FE model of honeycomb material[J]. Engineering Mechanics, 2013, 30(7):248-254. (in Chinese)
|
[13] |
Nguyen P T L, Lee J Y, Yim H J, et al. Optimal design of vehicle structure for improving small-overlap rating[J]. International Journal of Automotive Technology, 2015, 16(6):959-965.
|
[14] |
Mitra A C, Patil M V, Banerjee N. Optimization of vehicle suspension parameters for ride comfort based on RSM[J]. Journal of The Institution of Engineers (India):Series C, 2015, 96(2):165-173.
|
[15] |
Kim M S, Kang D O, Heo S J. Innovative design optimization strategy for the automotive industry[J]. International Journal of Automotive Technology, 2014, 15(2):291-301.
|
[16] |
邓磊, 乔志德, 宋文萍, 等. 基于响应面方法的风力机叶片多目标优化设计研究[J]. 空气动力学学报, 2012, 30(3):405-410. Deng Lei, Qiao Zhide, Song Wenping, et al. Multi-objective aerodynamic optimization design of wind turbine blade based on response surface methodology[J]. Acta Aerodynamica Sinica, 2012, 30(3):405-410. (in Chinese)
|
[17] |
钱建魁, 毛筱菲, 王孝义, 等. 基于CFD和响应面方法的最小阻力船型自动优化[J]. 船舶力学, 2012, 16(增刊1):36-43. Qian Jiankui, Mao Xiaofei, Wang Xiaoyi, et al. Ship hull automated optimization of minimum resistance via CFD and RSM technique[J]. Journal of Ship Mechanics, 2012, 16(Suppl 1):36-43. (in Chinese)
|
[18] |
Murakami S, Mochida A, Sakamoto S. CFD analysis of wind-structure interaction for oscillating square cylinders[J]. Journal of Wind Engineering and Industrial Aerodynamics, 1997, 72:33-46.
|
[19] |
吴先宇, 罗世彬, 陈小前, 等. 基于响应面模型的二维高超声速进气道优化[J]. 宇航学报, 2007, 28(5):1127-1132. Wu Xianyu, Luo Shibin, Chen Xiaoqian, et al. Optimization of the 2D hypersonic inlet based on response surface model[J]. Journal of Astronautics, 2007, 28(5):1127-1132. (in Chinese)
|
[20] |
卢健钊, 殷国富, 王玲. 基于iSIGHT的机床结构CAD/CAE集成优化方法研究[J]. 组合机床与自动化加工技术, 2013(2):22-24. Lu Jianzhao, Yin Guofu, Wang Ling. Research on the CAD/CAE integrated optimization method of machine tool structures based on iSIGHT[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2013(2):22-24. (in Chinese)
|
[21] |
Pointwise, Inc. Pointwise|User Manual[EB]. 2016.
|
[22] |
Fluent, Inc. Fluent Documentation[EB]. 2014.
|
[23] |
李燕. 基于交叉验证的基本解法求复杂区域边界值问题[D]. 太原:太原理工大学, 2015. Li Yan. The method of fundamental solution with LOOCV for boundary value problems in complicated domains[D]. Taiyuan:Taiyuan University of Technology, 2015. (in Chinese)
|