锥形非固结隔震支座理论模型参数试验研究及其结构地震响应分析

何文福; 曾一峰; 许浩; 刘文光; 冯德民

doi:10.6052/j.issn.1000-4750.2019.07.0410

锥形非固结隔震支座理论模型参数试验研究及其结构地震响应分析

1. 上海大学土木工程系, 上海 200072;
2. 藤田技术中心, 日本厚木 243-0125

基金项目:

国家自然科学基金重大研究计划项目（51778355，51778356）

详细信息

作者简介:
何文福: 曾一峰(1995-),男,湖南人,硕士生,主要从事结构抗震和防灾减灾研究(E-mail:zengyi1995@shu.edu.cn);许浩(1991-),男,安徽人,工学博士,主要从事核电站三维隔震研究(E-mail:xuhaoxy08@shu.edu.cn);刘文光(1968-),男,呼和浩特人,教授,工学博士,主要从事结构隔震减震研究(E-mail:liuwg@aliyun.com);冯德民(1964-),男,日本厚木人,研究员,博士,主要从事隔震、消能与结构减震控制方面的研究(E-mail:deminf@gmail.com).

中图分类号: TU352.12
计量
- 文章访问数: 330
- HTML全文浏览量: 37
- PDF下载量: 32
出版历程
- 收稿日期: 2019-07-23
- 修回日期: 2019-09-25

EXPERIMENTAL STUDY ON CONSTITUTIVE MODEL PARAMETERS OF NON-CONSOLIDATION TAPERED BEARING AND SEISMIC RESPONSE ANALYSIS OF STRUCTURES

1. Department of Civil Engineering, Shanghai University, Shanghai 200444, China;
2. Fujita Corp, Atsugi 243-0125, Japan

摘要

摘要: 提出了一种适用于低层及多层房屋抗震的锥形非固结隔震支座，建立了该支座在水平剪切、滑动和斜面压剪阶段的力学模型，对10组不同设计参数的支座试件进行了参数试验研究，包括坡度角、橡胶层厚度、加载位移及竖向压应力与支座水平力学性能的相关性，试验结果表明所提出的理论模型与试验结果吻合较好，得到了支座设计参数与耗能影响规律。并进一步给出了锥形非固结隔震结构的高宽比在不同场地的限值，Ⅰ、Ⅱ、Ⅲ和Ⅳ类场地的高宽比限值分别为2.3、1.7、1.3和0.5。通过有限元软件探讨其在地震作用下的响应规律，结果表明在不同力学参数下锥形非固结结构的抗震能力均较显著。
- 锥形支座 /
- 理论本构 /
- 力学性能 /
- 高宽比限值 /
- 结构响应
Abstract: Non-consolidation tapered bearing is designed for low-rise and multi-story buildings. The constitutive model consists of horizontal rubber-shearing phase, sliding friction phase and inclined rubber-compressing phase. The energy-consumption relationship between design parameters were discussed including the plate slope angle of inclined plane surface, the thickness of rubber sheet, horizontal loading displacement and vertical stress. 10 different sets of bearing based on the design parameters were studied in quasi-static experiments. The results indicated that the theoretical model is regarded as a good approximation. The relationship between design parameters and energy consumption was obtained. Furthermore, the limited aspect ratios of the bearing at different site were developed. The limited aspect ratio of the I, II, III and IV sites are 2.3, 1.7, 1.3 and 0.5, respectively. The finite element software was used to research the seismic response under seismic effect. The numerical results indicated that an isolated structure has a significant advantage on reducing superstructure response under different mechanical parameters.
- tapered bearing /
- constitutive model /
- mechanical properties /
- aspect ratio limit /
- structural response

HTML全文

参考文献(20)

[1]	唐家祥, 刘再华. 建筑结构基础隔震[M]. 武汉:华中理工大学出版杜, 1993. Tang Jiaxiang, Liu Zaihua. Base Isolation on Building Structure[M]. Wuhan:Huazhong University of Science and Technology Press, 1993. (in Chinese)
[3]	姚新强, 孙柏涛, 杨在林, 等. 地震灾害农居易损性新方法研究[J]. 工程力学, 2018, 35(6):191-199. Yao Xinqiang, Sun Baitao, Yang Zailin, et al. A new method for vulnerability of rural buildings in earthquake disasters[J]. Engineering Mechanics, 2018, 35(6):191-199. (in Chinese)
[4]	Kelly J M. Seismic Isolation Systems for Developing Countries[J]. Earthquake Spectra, 2002, 18(3):385-406.
[5]	Dezfuli F H, Alam M S. Multi-criteria optimization and seismic performance assessment of carbon FRP-based elastomeric isolator[J]. Engineering Structures, 2013, 49(2):525-540.
[6]	Engelen N C V, Osgooei P M, Tait M J. Partially Bonded fiber-reinforced elastomeric isolators (PB-FREIs)[J]. Structural Control and Health Monitoring, 2015, 22(3):417-432.
[7]	Toopchi-Nezhad H, Ghotb M R, Al-Anany Y M. Partially bonded fiber reinforced elastomeric bearings:Feasibility, effectiveness, aging effects, and low-temperature response[J]. Engineering Structures, 2019, 179(15):120-128.
[8]	Tsang H H. Seismic isolation by rubber-soil mixtures for developing countries[J]. Earthquake Engineering & Structural Dynamics, 2008, 37(2):283-303.
[9]	Tsang H H, Lo S H, Xu X. Seismic Isolation for Low-to-Medium-Rise Buildings Using Granulated Rubber-Soil Mixtures:Numerical Study[J]. Earthquake Engineering & Structural Dynamics 2012, 41(14):2009-2024.
[10]	Nanda R P, Agarwal P, Shrikhande M. Suitable Friction Sliding Materials for Base Isolation of Masonry Buildings[J]. Shock and Vibration, 2012, 19(6):1327-1339.
[11]	谭平, 徐凯, 刘晗, 等. 村镇建筑新型简易隔震技术研究[J]. 工程力学, 2017, 34(增刊1):233-238. Tan Ping, Xu Kai, Liu Han, et al. Study of new seismic isolation technology for rural buildings[J]. Engineering Mechanics, 2017, 34 (Suppl 1):233-238. (in Chinese)
[12]	陈彪汉, 张广泰, 等. 村镇建筑叠层轮胎隔震支座竖向力学性能试验研究[J]. 建筑结构, 2019, 49(8):49-52 , 21. Chen Biaohan, Zhang Guangtai, et al. Experimental study on the vertical mechanical properties of the laminated tires isolation bearing of rural buildings[J]. Building Structure, 2019, 49(8):49-52, 21. (in Chinese)
[13]	孟庆利, 冯浩. 铅芯废旧轮胎隔震垫(LRTP)力学性能试验研究[J]. 土木工程学报, 2018, 51(1):58-67. Meng Qingli, Feng Hao. The experimental study on mechanical behavior of Lead Recycle Tire Pads (LRTP)[J]. China Civil Engineering Journal, 2018, 51(1):58-67. (in Chinese)
[14]	曹万林, 戴租远, 叶炜, 等. 村镇建筑低成本隔震技术研究现状与展望[J]. 自然灾害学报, 2014, 23(6):38-46. Cao Wanlin, Dai Zuyuan, Ye Wei, et al. Research and prospect of low-cost isolation techniques for rural buildings[J]. Journal of Natural Disasters, 2014, 23(6):38-46. (in Chinese)
[15]	尚守平, 姚菲, 刘可. 一种新型隔震层的构造及其振动台试验研究[J]. 土木工程学报, 2011, 44(2):36-41. Shang Shouping, Yao Fei, Liu Ke. Study of the structure of a new type of isolation layer and shaking table test[J]. China Civil Engineering Journal, 2011, 44(2):36-41. (in Chinese)
[16]	袁康, 郭军林, 李英民. 村镇建筑新型简易滑移隔震体系拟静力试验研究[J]. 工业建筑, 2015, 45(11):30-34. Yuan Kang, Guo Junlin, Li Yingmin. Quasi-static test of new kind of simple sliding seismic isolation system for rural buildings[J]. Industrial Construction, 2015, 45(11):30-34. (in Chinese)
[17]	郑士举, 王卓琳, 蒋利学, 等. 既有村镇住宅结构现状调查分析[J]. 建筑结构, 2011, 41(增刊1):1229-1234. Zeng Shiju, Wang Zhuolin, Jiang Lixue, et al. Status survey on the existing rural residential construction[J]. Building Structure, 2011, 41 (Suppl 1):1229-1234. (in Chinese)
[18]	刘文光. 橡胶隔震支座力学性能及隔震结构地震反应分析研究[D]. 北京:北京工业大学, 2003. Liu Wenguang. Mechanics properties of rubber bearings and earthquake response analysis of isolated structure[D]. Beijing:Beijing University of Technology, 2003. (in Chinese)
[19]	汪军. 建筑五金速查手册[M]. 北京:中国电力出版社. 2008. Wang Jun. Construction Hardware Quick Reference Manual[M]. Beijing:China Electric Power Press, 2008. (in Chinese)
[20]	王涛, 李吉超, 王飞. 针对核电厂三维隔震的厚层橡胶支座力学性能研究[J]. 核动力工程, 2015, 36(5):37-40. Wang Tao, Li Jichao, Wang Fei. Experimental Study on Thick Rubber Bearings of Three-Dimensional Isolation of Nuclear Power Plants[J]. Nuclear Power Engineering, 2015, 36(5):37-40. (in Chinese)
[21]	Suh J B, Graham Kelly S. Stress response of a rubber block with frictional contact under axial loading[J]. International Journal of Non-Linear Mechanics, 2015, 68(8):41-51.