预应力组合箱梁抗弯能力计算分析

胡少伟; 胡汉林

预应力组合箱梁抗弯能力计算分析

南京水利科学研究院, 南京 210024

基金项目: 江苏省自然科学基金项目《预应力高强组合箱梁桥复合受力性能分析与设计》(BK2007010);中央级公益性科研院所重大项目《预应力组合箱梁桥复合受力性能与设计理论研究》(Y40705)

详细信息

作者简介:
胡汉林(1985-),男,湖北云梦人,硕士,从事工程结构与材料的研究(E-mail: hlhu@nhri.cn).

中图分类号: TU318; TU398.9
计量
- 文章访问数: 1392
- HTML全文浏览量: 29
- PDF下载量: 582
出版历程
- 收稿日期: 2012-05-08
- 修回日期: 2012-05-08
- 刊出日期: 2012-05-24

CALCULATION AND ANALYSIS ON FLEXURAL CAPACITY OF PRESTRESSED COMPOSITE BOX GIRDER

Nanjing Hydraulic Research Institute, Nanjing 210024, China

More Information

Corresponding author:
HU Shao-wei: 胡少伟

摘要

摘要: 预应力钢-混凝土组合梁作为一种新型的横向承重构件,在工程中得到了广泛的使用,准确计算其抗弯承载能力是工程上最为基本也是最重要的要求。该文以弹性分析理论为基础,推导了考虑交界面相对滑移和预应力增量的预应力组合梁弹性承载能力和挠度计算公式;以完全协同作用和平截面假定为前提,采用简化的塑性理论,推导了考虑预应力增量的极限抗弯承载能力计算公式。公式能够反映预应力组合梁的受力特点,计算结果与试验值吻合良好,满足工程精度。
- 预应力组合箱梁 /
- 抗弯承载力 /
- 塑性理论 /
- 平截面假定 /
- 计算分析
Abstract: The prestressed steel and concrete composite beams having been widely used in engineering as a new transverse bearing component. The bending capacity is one of the most fundamental and important behaviors. The calculation formulas of elastic bearing capacity and deflection were derived considering the slip at the steel-concrete interface and the stress increments of prestressed tendons on the base of the elastic theory; and on the premise of plane section and complete composite action, the expressions of prestressed composite beam’s ultimate plastic capability which consider the stress increments of prestressed tendons were deduced, based on the simplified plastic theory. These foumulas can reflect the characteristics of the prestressed composite box girder. It turns out that the calculation values are in good agreement with the experimental results, which meet the engineering accuracy.
- prestressed composite box girder /
- flexural capacity /
- plasticity theory /
- normal sections assumption /
- computational analysis

HTML全文

参考文献(12)

[1]	中华人民共和国建设部. GB 500l7-2003 钢结构设计规范[S]. 北京: 中国建筑工业出版社, 2003. The Ministry of Construction of the Peoples Republic of China Moc. GB 500l7-2003 Code for design of steel structures [S]. Beijing: China Architecture and Building Press, 2003. (in Chinese)
[2]	童根树, 夏骏. 考虑滑移影响的钢-混凝土组合梁的刚度[J]. 建筑钢结构进展, 2008, 10(6): 4-11. Tong Genshu, Xia Jun. Bending stiffness of steel-concrete composite beams considering effect of slip[J]. Construction Steel Structure Progress, 2008, 10(6): 4-11. (in Chinese)
[3]	聂建国, 刘明, 叶列平. 钢-混凝土组合结构[M]. 北京: 中国建筑工业出版社, 2005. Nie Jianguo, Liu Ming, Ye Lieping. Steel and concrete composite structure [M]. Beijing: China Architecture and Building Press, 2005. (in Chinese)
[4]	Wang Y C. Deflection of steel-concrete composite beams with partial interaciton [J]. Journal Engineering, ASCE, 1998, 124(10): 1159-1165.
[5]	Slutter R G, Driscoll G C. Flexural strength of steel-concrete composite beams [J]. Journal of Structure Division, ASCE, 1965, 91(ST2): 71-99.
[6]	聂建国, 谭英, 王洪全. 钢-高强混凝土组合梁栓钉剪力连接件的设计计算[J]. 清华大学学报(自然科学版), 1999, 39(12): 94-97. Nie Jianguo, Tan Ying, Wang Hongquan. Strength of stud shear connectors in composite steel-HC beams [J]. Journal of Tsinghua University (Science and Technology), 1999, 39(12): 94-97. (in Chinese)
[7]	胡少伟, 聂建国. 复合弯扭下钢-混凝土组合梁连接件的设计方法[J]. 土木工程学报, 2004, 37(10): 28-32. Hu Shaowei, Nie Jianguo. A simplified design procedure of stud connector in composite steel-concrete beams subjected to combined flexure and torsion [J]. China Civil Engineering Journal, 2004, 37(10): 28-32. (in Chinese)
[8]	Eurocode 4. Design of composite steel and concrete structures part 1.1: General rule-s and rules for buildings[S]. 2004.
[9]	胡汉林. 预应力组合梁结构抗弯性能试验研究与理论分析[D]. 南京: 南京水利科学研究院, 2010. Hu Hanlin. Experimental study and theoretical analysis on the flexural behavior of the prestressed composite box beam structure [D]. Nanjing: Nanjing Hydraulic Research Institute, 2010. (in Chinese)
[10]	聂建国, 温凌燕, 刘冬林. 预应力钢-混凝土简支组合梁变形计算的刚度增强法[J]. 工业建筑, 2003, 33(12): 9-11. Nie Jianguo, Wen Lingyan, Liu Donglin. An increased stiffness method for predicting the deformation of prestressed simply supported steel-concrete composite beam [J]. Industrial Construction, 2003, 33(12): 9-11. (in Chinese)
[11]	Chen Shiming, Gu Ping. Load carrying capacity of composite beams prestressed with external tendons under positive moment [J]. Journal of Constructional Steel Research, 2005, 61: 515-53.
[12]	聂建国. 钢-混凝土组合梁结构-试验、理论与应用[M]. 北京: 科学出版社, 2005. Nie Jianguo. Steel and concrete composite beams structure-test theory and application [M]. Beijing: Science Press, 2005. (in Chinese)

施引文献

资源附件(0)

计量

文章访问数: 1392
HTML全文浏览量: 29
PDF下载量: 582
被引次数: 0

预应力组合箱梁抗弯能力计算分析

作者简介: 胡汉林(1985-),男,湖北云梦人,硕士,从事工程结构与材料的研究(E-mail: hlhu@nhri.cn).

计量

出版历程

CALCULATION AND ANALYSIS ON FLEXURAL CAPACITY OF PRESTRESSED COMPOSITE BOX GIRDER

Corresponding author: HU Shao-wei: 胡少伟

计量

出版历程

目录

作者简介:
胡汉林(1985-),男,湖北云梦人,硕士,从事工程结构与材料的研究(E-mail: hlhu@nhri.cn).

Corresponding author:
HU Shao-wei: 胡少伟