刘宏民, 边宇虹. 大宽厚比冷轧带材三维应力分布的样条有限条分析[J]. 工程力学, 1994, 11(2): 138-144.
引用本文: 刘宏民, 边宇虹. 大宽厚比冷轧带材三维应力分布的样条有限条分析[J]. 工程力学, 1994, 11(2): 138-144.
shu
Liu Hongmin, Bian Yuhong. ANALYSIS OF THE 3-DIMENSIONAL STRESS DISTRIBUTIONS OF COLD STRIP ROLLING UNDER LARGE WIDTH TO THICKNESS RATIO BY SPLINE FINITE STRIP METHOD[J]. Engineering Mechanics, 1994, 11(2): 138-144.
Citation: Liu Hongmin, Bian Yuhong. ANALYSIS OF THE 3-DIMENSIONAL STRESS DISTRIBUTIONS OF COLD STRIP ROLLING UNDER LARGE WIDTH TO THICKNESS RATIO BY SPLINE FINITE STRIP METHOD[J]. Engineering Mechanics, 1994, 11(2): 138-144.
shu

大宽厚比冷轧带材三维应力分布的样条有限条分析

ANALYSIS OF THE 3-DIMENSIONAL STRESS DISTRIBUTIONS OF COLD STRIP ROLLING UNDER LARGE WIDTH TO THICKNESS RATIO BY SPLINE FINITE STRIP METHOD

    摘要
  • 摘要: 本文在轧件宽厚比为625的条件下,用三次样条函数有限条法研究了冷轧带材三维应力的分布问题。获得了轧后边浪和中浪两种不同板形条件下的应力分布规律。对板形理论和板形控制技术的发展有指导意义。

     

    Abstract: Under the width to thickness ratio 625 of strip,this paper studies the 3-dimensional stress distributions of cold strip rolling by cubic spline function finite strip method.The distributions of the stresses are obtanied in 2 cases of edge wave and center wave of rolled strip.This paper Is of impertance to the shape theory and the shape control.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回