Volume 36 Issue 1
Turn off MathJax
Article Contents
Abstract
References
Related Articles
CUI Zhao-yan, XU Ming, CHEN Zhong-fan, WANG Fei. EXPERIMENTAL STUDY ON BEARING CAPACITY OF BOLTED STEEL-PSB-STEEL CONNECTIONS[J]. Engineering Mechanics, 2019, 36(1): 96-103,118. DOI: 10.6052/j.issn.1000-4750.2017.11.0792
Citation: CUI Zhao-yan, XU Ming, CHEN Zhong-fan, WANG Fei. EXPERIMENTAL STUDY ON BEARING CAPACITY OF BOLTED STEEL-PSB-STEEL CONNECTIONS[J]. Engineering Mechanics, 2019, 36(1): 96-103,118. DOI: 10.6052/j.issn.1000-4750.2017.11.0792
shu

EXPERIMENTAL STUDY ON BEARING CAPACITY OF BOLTED STEEL-PSB-STEEL CONNECTIONS

  • 1.

    Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University, Nanjing, Jiangsu 210096, China;

  • 2.

    Anhui Electric Power Design Institute Ltd, Hefei, Anhui 230001, China

More Information
  • Received Date: October 31, 2017
  • Revised Date: January 29, 2018
    Graphical Abstract
    • Abstract
  • Because of the advantage of the simple fabrication, high security and construction convenience, the bolted connection is widely applied in modern engineered bamboo and wood structures. In order to investigate the mechanical behavior of the bolted steel-Parallel strand bamboo-steel connections, twelve groups of specimens were tested under uniaxial tensile load. The effects of thickness to diameter ratio, fastener spacing and the end distance on the failure modes and the bearing capacity were reported in the paper. The results indicate that the failure mode of single and multi-bolted connections is the occurrence of one plastic hinge when the thickness to diameter ration is 5.0-5.7, and the occurrence of two plastic hinges when the thickness to diameter ration is 8.0-10.0. As the fastener diameter, spacing or the end distance increases, the bearing capacity gradually increases. The bolted connections with one column show good ductility, which gets worse as the number of columns increases. Comparing the experimental results with the calculations using the domestic code for wood structure, wood structure design manual and Eurocode 5, it was found that the domestic code is conservative and the Eurocode 5 has better applicability.
    • FullText(HTML)
    • References (30)
  • [1]
    凌志彬, 刘伟庆, 杨会峰, 等. 考虑位置函数的胶合木植筋粘结-滑移关系研究[J]. 工程力学, 2016, 33(3):95-103. Ling Zhibin, Liu Weiqing, Yang Huifeng, et al. Study on bond-slip law of glulam connection with glued-in rebar with consideration of location function[J]. Engineering Mechanics, 2016, 33(3):95-103. (in Chinese)
    [2]
    Jensen J L, Quenneville P. Experimental investigations on row shear and splitting in bolted connections[J]. Construction and Building Materials, 2011, 25(5):2420-2425.
    [3]
    李玉顺, 蒋天元, 单炜, 等. 钢-竹组合梁柱边节点拟静力试验研究[J]. 工程力学, 2013, 30(4):241-248. Li Yushun, Jiang Tianyuan, Shan Wei, et al. Quasi-static test on steel-bamboo composite beam-column exterior joints[J]. Engineering Mechanics, 2013, 30(4):241-248. (in Chinese)
    [4]
    Xu B H, Bouchaïr A, Racher P. Mechanical behavior and modeling of dowelled steel-to-timber moment-resisting connections[J]. Journal of Structural Engineering, 2015, 141(6):04014165.
    [5]
    舒赣平, 杜二峰, 张欣欣, 等. T型钢连接梁柱节点抗火性能试验研究[J]. 工程力学, 2016, 33(7):136-143. Shu Ganping, Du Erfeng, Zhang Xinxin, et al. Experimental study on the fire performance of steel beam-column T-stub joints[J]. Engineering Mechanics, 2016, 33(7):136-143. (in Chinese)
    [6]
    杨俊芬, 陈雷, 程锦鹏, 等. 一种新型装配式梁柱节点抗性能试验研究[J]. 工程力学, 2017, 34(12):75-86. Yang Junfen, Chen Lei, Cheng Jinpeng, et al. Experimental study on seismic behavior of a new type of fully assembled beam-column joints[J]. Engineering Mechanics, 2017, 34(12):75-86. (in Chinese)
    [7]
    Johanson K W. Theory of timber connections[M]. Bern:International Association for Bridge and Structural Engineering (IABSE), 1949:249-262.
    [8]
    Ozturk M, Saba N, Altay V, et al. Biomass and bioenergy:An overview of the development potential in Turkey and Malaysia[J]. Renewable and Sustainable Energy Reviews, 2017, 79:1285-1302.
    [9]
    Cramer C O. Load distribution in multiple-bolt tension joints[J]. Journal of Structural Division, ASCE, 1968, 94(5):1101-1117.
    [10]
    BS EN 1995-1-1, Eurocode 5:Design of timber structures-Part 1-1:General-common rules and rules for buildings[S]. London:British Standards Institution, 2004.
    [11]
    徐德良, 刘伟庆, 周叮, 等. 胶合木与胶合木螺栓连接力学性能试验研究[J]. 建筑结构学报, 2011, 32(7):93-100. Xu Deliang, Liu Weiqing, Zhou Ding, et al. Experimental study of bolted glued timber-to-timber joints[J]. Journal of Building Structures, 2011, 32(7):93-100. (in Chinese)
    [12]
    冯立, 肖岩, 单波, 等. 胶合竹结构梁柱螺栓连接节点承载力试验研究[J]. 建筑结构学报, 2014, 35(4):230-235. Feng Li, Xiao Yan, Shan Bo, et al. Experimental study on bearing capacity of glubam beam-column bolted joints[J]. Journal of Building Structures, 2014, 35(4):230-235. (in Chinese)
    [13]
    王明谦, 顾祥林, 宋晓滨, 等. 胶合木梁柱嵌入钢板-螺栓拼接节点纯弯与弯剪性能试验研究[J]. 建筑结构学报, 2016, 37(4):64-72. Wang Mingqian, Gu Xianglin, Song Xiaobin, et al. Experimental study on bolted glued laminated timber connections with slotted-in steel plates under pure bending and combined shear and bending[J]. Journal of Building Structures, 2016, 37(4):64-72. (in Chinese)
    [14]
    Khalil H P S A, Bhat I U H, Jawaid M, et al. Bamboo fibre reinforced biocomposites:A review[J]. Materials and Design, 2012, 42(1):353-368.
    [15]
    Sharma B, Gatóo A, Bock M, et al. Engineered bamboo for structural applications[J]. Construction and Building Materials, 2015, 81:66-73.
    [16]
    Kumar A, Vlach T, Laiblova L, et al. Engineered bamboo scrimber:Influence of density on the mechanical and water absorption properties[J]. Construction and Building Materials, 2016, 127:815-827.
    [17]
    Xu M, Cui Z Y, Chen Z F, et al. Experimental study on compressive and tensile properties of a bamboo scrimber at elevated temperatures[J]. Construction and Building Materials, 2017, 151:732-741.
    [18]
    崔兆彦, 王飞, 徐明, 等. 高温下重组竹顺纹销槽承压强度试验研究[J].东南大学学报(自然科学版), 2017, 47(6):1174-1179. Cui Zhaoyan, Wang Fei, Xu Ming, et al. Experimental study on embedding strength of bamboo scrimber parallel to grain at high temperatures[J]. Journal of Southeast University (National science edition), 2017, 47(6):1174-1179. (in Chinese)
    [19]
    李霞镇. 重组竹螺栓连接节点承载性能研究[D]. 北京:中国林业科学研究院, 2013. Li Xiazhen. Research on the bearing performance of bolt joint for recombinant bamboo[D]. Beijing:Chinese Academy of Forestry Sciences, 2013. (in Chinese)
    [20]
    周爱萍, 黄东升, 唐思远, 等. 重组竹-钢填板螺栓节点承载力试验研究[J]. 南京工业大学学报(自科科学版), 2016, 38(5):34-39. Zhou Aiping, Huang Dongsheng, Tang Siyuan, et al. Experimental research on bearing capacity of the bolted PSB-steel-PSB joints[J]. Journal of Nanjing Tech University (National science edition), 2016, 38(5):34-39. (in Chinese)
    [21]
    JG/T 199-2007, 建筑用竹材物理力学性能试验方法[S]. 北京:中国标准出版社, 2007. JG/T 199-2007, Testing methods for physical and mechanical properties of bamboo used in building[S]. Beijing:Standards Press of China, 2007. (in Chinese)
    [22]
    ASTM D143-14, Standard test methods for small clear specimens of timber[S]. Philadelphia:American Society for Testing and Materials, 2014.
    [23]
    ASTM D5764-97a(2013), Standard test method for evaluating dowel-bearing strength of wood and wood-based products[S]. Philadelphia:American Society for Testing and Materials, 2013.
    [24]
    ASTM F1575-03, Standard test methods for bolted connections in wood and wood-based products[S]. Philadelphia:American Society for Testing and Materials, 2003.
    [25]
    ASTM D5652-95, Standard test methods for bolted connections in wood and wood-based products[S]. Philadelphia:American Society for Testing and Materials, 2007.
    [26]
    Reynolds T, Sharma B, Harries K, et al. Dowelled structural connections in laminated bamboo and timber[J]. Composites Part B:Engineering, 2016, 90(9):232-240.
    [27]
    Jensen J L, Quenneville P, Girhammar U A, et al. Splitting of timber beams loaded perpendicular to grain by connections-Combined effect of edge and end distance[J]. Construction and Building Materials, 2012, 35(10):289-293.
    [28]
    NDS 1997, National design specification for wood construction[S]. Washington DC:National Forest Products Assocition, 1997.
    [29]
    GB 50005-2003, 木结构设计规范[S]. 北京:中国建筑工业出版社, 2003. GB 50005-2003, Timber structures design code[S]. Beijing:China Architecture Industry Press, 2005. (in Chinese)
    [30]
    木结构设计手册编辑委员会.木结构设计手册[M]. 3版. 北京:中国建筑工业出版社, 2005:86-88. The Editorial Board of Wood Structure Design Manual. Wood structure design manual[M]. 3rd ed. Beijing:China Architecture Industry Press, 2005:86-88. (in Chinese)
    • Related Articles

  • Related Articles

    [1]YANG Jing-jie, WANG Wei-yong, SHI Yu. STUDY ON LOAD-BEARING CAPACITY OF COLUMNS WITH COLD-FORMED THIN-WALLED STEEL QUADRUPLE-LIMB BUILT-UP BOX-SHAPED SECTION[J]. Engineering Mechanics, 2024, 41(7): 186-201. DOI: 10.6052/j.issn.1000-4750.2022.06.0514
    [2]CHEN Bu-qing, ZENG Lei, LIU Chang-jun, MO Jin-xu. STUDY ON SHEAR BEHAVIOR AND BEARING CAPACITY OF STEEL REINFORCED CONCRTE DEEP BEAMS[J]. Engineering Mechanics, 2022, 39(9): 215-224. DOI: 10.6052/j.issn.1000-4750.2021.05.0402
    [3]LÜ Wen-gao, HE Zheng. ANALYSIS ON ULTIMATE LOAD-CARRYING CAPACITY AND FAILURE MODES OF LONG-SPAN CABLE-STAYED BRIDGES WITH FLOATING SYSTEMS UNDER THE ACTION OF VERTICAL LOADS[J]. Engineering Mechanics, 2022, 39(5): 145-158. DOI: 10.6052/j.issn.1000-4750.2021.03.0159
    [4]LI Xue-song, ZHANG Yi-xiao, GAO Zhong-kang, HUANG Yong-hui, LIU Ai-rong. IN-PLANE BEARING CAPACITY OF HIGH-STRENGTH CONCRETE-FILLED STEERL TUBULAR ARCHES[J]. Engineering Mechanics, 2022, 39(S): 115-120. DOI: 10.6052/j.issn.1000-4750.2021.05.S019
    [5]XING Guo-hua, WU Ming-yang, CHANG Zhao-qun, ZHANG Guang-tai, LIU Ming-liang. LOAD BEARING CAPACITY AND FAILURE MODE OF CORRODED PRESTRESSED CONCRETE BEAMS[J]. Engineering Mechanics, 2020, 37(7): 177-188. DOI: 10.6052/j.issn.1000-4750.2019.08.0503
    [6]SHAO Jian-hua, GU Qiang, TANG Bai-jian, WANG Zhi-jun. EXPERIMENTAL RESEARCH ON SEISMIC PERFORMANCE OF MULTI-STORY STEEL PLATE SHEAR WALLS DESIGNED BY THE SHEAR BEARING CAPACITY OF PLATE[J]. Engineering Mechanics, 2015, 32(4): 54-61. DOI: 10.6052/j.issn.1000-4750.2013.10.0963
    [7]XIE Nan, WANG Yong. STUDY ON LOAD-CARRYING CAPACITY OF SUPER HIGH SUPPORTS FOR FORMWORK[J]. Engineering Mechanics, 2008, 25(增刊Ⅰ): 148-153.
    [8]YU Lei, YAO Qian-feng, CHEN Ping, ZHAO Dong. A NEW CALCULATION METHOD FOR THE ULTIMATE LOAD-BEARING CAPACITY OF MASONRY-INFILLED FRAMES[J]. Engineering Mechanics, 2007, 24(6): 117-122.
    [9]JIN Wei-liang, SONG Jian, GONG Shun-feng, BAI Bing-ren. ANALYSIS OF BEARING CAPACITY AND STRENGTHENING OF DAMAGED MEMBERS FOR OFFSHORE PLATFORM[J]. Engineering Mechanics, 2003, 20(5): 100-105.
    [10]Li Guiqing, Tao Mouhua. Analysis of Bearing Capacity of A Frame-Shear Wall Structure[J]. Engineering Mechanics, 1986, 3(4): 106-113.

  • Cited by

    Periodical cited type(13)

    1. 李明德，张鑫，刘巧玲. 无机胶复合竹钢填板连接承载力试验研究. 新型建筑材料. 2025(01): 61-66 .
    2. 钟紫勤，赵仕兴，夏静，周巧玲，杨姝姮，何飞，尧禹. 基于参数统计法的重组竹材力学参数回归模型. 工业建筑. 2025(02): 20-30 .
    3. 周巧玲，赵仕兴，钟紫勤，张明，陈述伟，杨姝姮. 重组竹框架梁柱节点抗震性能试验研究. 工业建筑. 2025(02): 44-51 .
    4. 郝际平，许佳，田黎敏，栗蕾. 考虑弹性模量及截面尺寸变化的竹压杆稳定承载力研究. 工程力学. 2025(04): 78-86 . 本站查看
    5. 张子诚，唐思远，崔兆彦. 竹集成材自攻螺钉拉穿性能试验. 林业工程学报. 2023(02): 40-45 .
    6. 赵仕兴，周巧玲，齐锦秋，张明，陈述伟，钟紫勤，杨姝姮. 重组竹结构的研究现状与工程应用. 建筑结构. 2023(07): 109-117 .
    7. 李霞镇，任海青，李贤军，徐康，钟永，郝晓峰. 重组竹螺栓连接节点承载能力计算分析. 土木与环境工程学报(中英文). 2022(04): 78-86 .
    8. 王小盾，艾蕊，杜颜胜，陈志华. 现代竹结构螺栓和螺钉连接节点研究现状. 钢结构(中英文). 2022(05): 1-9 .
    9. 张醒，孙立江，夏拥军，孟凡豪，马勇. 抱杆螺栓连接节点的极限承载能力研究. 中国工程机械学报. 2022(05): 423-429 .
    10. 冯涯钦，王雪，余肖红. 工程竹材力学性能和节点连接性能研究进展. 竹子学报. 2022(04): 10-18 .
    11. 陈国，吴静，谈闯，于云飞. 竹集成材钉连接顺纹向的抗剪性能. 华中科技大学学报(自然科学版). 2021(06): 121-126 .
    12. 李霞镇，任海青，李贤军，钟永，徐康，郝晓峰. 重组竹-钢夹板螺栓连接节点承载特性和破坏形态. 林业科学. 2021(08): 157-166 .
    13. 李牧原，李军，王燕. 单层球面木网壳结构研究现状. 林产工业. 2020(01): 37-41 .

    Other cited types(17)

Catalog

    Get Citation
    PDF
    XML

    Article Metrics

    Article views (670) PDF downloads (135) Cited by(30)
    Related

    京ICP备18030614号

    Copyright © 《工程力学》编辑部

    Address: North-Star Times Tower, No.8 Beichendong Road, Chaoyang District, Beijing, China China Pos: 100084

    Tel: (010)62788648 Fax: 021-64253812 Email: gclxbjb@tsinghua.edu.cn

    Supported by: Beijing Renhe Information Technology Co.,Ltd.  Baidu Analytics

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return