RESEARCH ON THE STRATEGY OF PRELOAD AND EXPERIMENTAL STUDY ON OCTAGON GASKET SEALING STRUCTURE FOR HIGH PRESSURE VESSELS
-
摘要: 石油、化工、核电行业法兰螺柱预紧过程中, 螺柱预紧应力计算与保证垫片应力均匀分布的预紧方法是工程实际中值得研究的问题. 该文通过对螺柱垫片系统进行物理结构分析, 受力过程分析, 提出了一种基于垫片线性变形的螺柱应力分布数学模型及预紧方法. 研究表明模型计算结果与试验结果相符合, 满足实际规律. 因此, 该数学模型能用于分析预紧过程中螺柱应力变化情况；计算出螺柱具有相同密封应力的初始载荷及只需一次加载就可以达到理论密封应力的预紧优化方法. 这使得在预紧过程中不必采用边预紧边测试应变的方法来进行指导, 更有效保证密封性能.Abstract: The distribution of stress and the method of same stress for uniform bolts preloads is worthy of studying during the process of tightening a flange. By analyzing the physical structure and its loading process, a mathematical model is proposed for studying the stress of bolts. The model is based on a liner-elastic model about a gasket and can predict both the scatter in bolt preloads and the ?nal clamp load distribution after the completion of joint tightening of a vessel ?ange assembly. Experimental veri?cation is provided for the validation of the mathematical model. Experimental and analytical results are presented and discussed. The model provides a good prediction for the ?nal clamp load in the join. Therefore, the novel formulation can be used to calculate and estimate the variation of bolt stress and could be used for developing tightening strategies that would achieve a more uniform clamp load in the ?ange at the initial assembly. Moreover, the model makes the process of preload without testing strain and ensure the sealing performance.
-
Keywords:
- preload /
- bolt /
- gasket /
- tightening strategies /
- mathematical model /
- stress test
-
-
[1] 盛水平, 韩树新, 郑津洋. 高压容器双锥环密封性能的研究[J]. 工程力学, 2010, 27(5): 173―178. Sheng Shuiping, Han Shuxin, Zheng Jinyang. Research on sealing properties of the double-cone structure in high pressure vessel[J]. Engineering Mechanics, 2010, 27(5): 173―178. (in Chinese) [2] 蔡仁良, 顾伯勤, 宋鹏云. 过程装备密封技术[M]. 北京: 化学工业出版社, 2002: 58―69. Cai Renliang, Gu Boqin, Song Pengyun. Process equipment sealing technology[M]. Beijing: Chemical Industry Press, 2002: 58―69. (in Chinese) [3] Bibel G, Ezell R. An improved flange bolt-up procedure using experimentally determined elastic interaction Coefficients[J]. American Society of Mechanical Engineers Journal of Pressure Vessel Technology, 1992, 114(1): 439―442. [4] 周体伟. 法兰连接中的螺柱预紧力[J]. 石油化工设备技术, 1992, 13(1): 17―22. Zhuo Tiwei. The pretightness force of bolts in flange connection[J]. Petrochemical Equipment Technology, 1992, 13(1): 17―22. [5] 叶红, 颜廷武, 刘元胜. 法兰连接中的螺柱预紧力[J]. 有色金属, 2005, 21(3): 46―48. Ye Hong, Yan Tingwu, Liu Yuansheng. The Pretightness force of bolts in flange connection[J]. Nonferrous Mining and Metallurgy, 2005, 21(3): 46―48. [6] Bouzid A, Diany M, Derenne M. Determination of the gasket effective width for the ASME proposed flange design rules[M]. New York: Pressure Vessel Research Committee, 2007: 27―48. [7] Bouzid A-H. On the effect of external bending loads in bolted flange joints[J]. Journal of Pressure Vessel Technology, 2009, 131(9): 1―8. [8] Bouzid A, Derenne M. A simple method for analyzing the contact stress in bolted flange joints with non-linear gaskets[J]. American Society of Mechanical Engineers International Journal of Pressure Vessels and Piping, 2009, 382(1): 103―111. [9] 陆磐谷. 高压法兰螺柱上紧技术的探讨[J]. 压力容器, 2008, 25(3): 57―61. Lu Pangu. Study on tightening technology of high pressure flange bolts[J]. Pressure Vessel Technology, 2008, 25(3): 57―61. (in Chinese) [10] Bouzid A-H, Galai H. A new approach to model bolted flange joints with full face gaskets[J]. American Society of Mechanical Engineers Journal of Pressure Vessel Technology, 2011, 133(2): 1―7.
计量
- 文章访问数: 270
- HTML全文浏览量: 18
- PDF下载量: 65
下载:
