Office
Journal Information
  • 工程力学
    Engineering Mechanics
    (月刊,1984年创刊)
    主管单位:中国科学技术协会
    主办单位:中国力学学会
    主  编:陆新征
    编辑出版:《工程力学》编辑部
    ISSN 1000-4750 CN 11-2595/O3
Current Issue
Volume 35 Issue 7, 25 July 2018
  
MAIN CONTENTS OF THE STANDARD FOR WIND LOADS ON ROOF STRUCTURES
YANG Qing-shan, TIAN Yu-ji, CHEN Bo, HUANG Guo-qing
Engineering Mechanics, 2018, 35 (7): 1-6.
Abstract ( 112 ) HTML PDF(536KB) ( 71 )
https://doi.org/10.6052/j.issn.1000-4750.2017.06.ST03
SCATTER AND DIFFRACTION OF ARBITRARY NUMBER OF HILLS FOR INCIDENT PLANE P-WAVES
BA Zhen-ning, PENG Lin, LIANG Jian-wen, HUANG Di-yang
Engineering Mechanics, 2018, 35 (7): 7-17,23.
Abstract ( 67 ) HTML PDF(2708KB) ( 49 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0181
THE DYNAMIC RESPONSE OF A SIMPLY SUPPORTED VISCOUSLY DAMPED BEAM SYSTEM UNDER A MOVING HARMONIC OSCILLATOR
CHENG Yong-feng, ZHU Zhao-qing, LU Zhi-cheng, ZHANG Fu-you
Engineering Mechanics, 2018, 35 (7): 18-23.
Abstract ( 47 ) HTML PDF(366KB) ( 39 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0252
ELASTIC-PLASTIC BUCKLING BEHAVIOR OF STEEL MATERIAL UNDER COMPLEX CYCLIC LOADING PATHS
WANG Yu-hang, YU Jie, WU Qiang
Engineering Mechanics, 2018, 35 (7): 24-38.
Abstract ( 88 ) HTML PDF(4888KB) ( 71 )
https://doi.org/10.6052/j.issn.1000-4750.2017.07.0525
STUDY ON HYSTERETIC MODEL AND SEISMIC PERFORMANCE OF DAMPING ENERGY DISSPATION BRACE WITH SELF-CENTERING CAPABILITY
XU Long-he, WANG Kun-peng, XIE Xing-si, LI Zhong-xian
Engineering Mechanics, 2018, 35 (7): 39-46.
Abstract ( 83 ) HTML PDF(881KB) ( 76 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0204
BUCKLING OF PURLINS SUPPORTING STANDING SEAM ROOF WITH ONE SAG-ROD
TANG Ya-jun, TONG Gen-shu, ZHANG Lei
Engineering Mechanics, 2018, 35 (7): 47-54.
Abstract ( 71 ) HTML PDF(461KB) ( 55 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0213
DESIGN WIND SPEED ESTIMATION FOR PULI BRIDGE BASED ON SHORT-TERM MEASURED DATA
LUO Ying, HUANG Guo-qing, CHEN Bao-zhen, LIU Wei-zhan, LI Ming-shui, LIAO Hai-li
Engineering Mechanics, 2018, 35 (7): 74-82.
Abstract ( 55 ) HTML PDF(556KB) ( 51 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0190
EXPERIMENTAL AND ANALYTICAL STUDY OF COMPOSITE STEEL PLATE SHEAR WALL WITH ASSEMBLED MULTI-CONCRETE SLAB
WANG Da-yang, HAN Qi-hao, ZHANG Yong-shan
Engineering Mechanics, 2018, 35 (7): 83-93,138.
Abstract ( 56 ) HTML PDF(12238KB) ( 25 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0195
ANALYTICAL STUDY ON OPTIMAL STIFFNESS DISTRIBUTION OF BEND-SHEAR STRUCTURES CONSIDERING LOAD DISTRIBUTION
HE Hao-xiang, WANG Wen-tao, FAN Shao-yong
Engineering Mechanics, 2018, 35 (7): 94-103,149.
Abstract ( 47 ) HTML PDF(1307KB) ( 40 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0197
STUDY ON DESIGN METHOD OF STRONG COLUMN AND WEAK BEAM BASED ON FRAGILITY FOR PRESTRESSED CONCRETEFRAME STRUCTURES
ZHANG Yao-ting, YANG Li, ZHANG Jiang, ZHANG Cheng-cheng
Engineering Mechanics, 2018, 35 (7): 104-116.
Abstract ( 57 ) HTML PDF(986KB) ( 42 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0200
THEORETICAL ANALYSIS ON THE PROGRESSIVE COLLAPSE OF RC FRAME STRUCTURES WITH SLABS
GAO Jia-ming, LIU Bo-quan, HUANG Hua, ZHOU Chang-quan
Engineering Mechanics, 2018, 35 (7): 117-126.
Abstract ( 49 ) HTML PDF(773KB) ( 55 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0201
EXPERIMENTAL STUDY ON SHEAR MECHANISM OF PERFOBOND CONNECTORS IN WIND TURBINES FOUNDATION
LÜ Wei-rong, ZHU Feng, LU Bei-rong, SHI Wei-hua, ZHANG Jia-zhi, HE Xiao-kun, QING Sheng-qing
Engineering Mechanics, 2018, 35 (7): 127-138.
Abstract ( 57 ) HTML PDF(15789KB) ( 20 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0207
A FINITE VOLUME NUMERICAL SIMULATION METHOD FOR ROCK MASS STRENGTH WEAKENING BY SEEPAGE WATER ABSORBING
GUO Ying, JIANG Xin-liang, CAO Dong-bo, BAI Tie-jun, ZHU Guang-yi, FENG Chun
Engineering Mechanics, 2018, 35 (7): 139-149.
Abstract ( 47 ) HTML PDF(758KB) ( 30 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0209
STUDY ON INTERFACE SLIP AND DEFORMATION OF BAMBOO-STEEL COMPOSITE I-BEAMS
LI Yu-shun, ZHANG Jia-liang, TONG Ke-ting, GUO Jun, WU Pei
Engineering Mechanics, 2018, 35 (7): 150-158,166.
Abstract ( 52 ) HTML PDF(3823KB) ( 35 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0215
PENETRATION TEST AND NUMERICAL SIMULATION OF ULTRAL-HIGH PERFORMANCE CONCRETE WITH A SCALED EARTH PENETRATOR
ZHANG Wen-hua, ZHANG Yun-sheng, CHEN Zhen-yu
Engineering Mechanics, 2018, 35 (7): 167-175,186.
Abstract ( 57 ) HTML PDF(2803KB) ( 46 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0237
SHEAR BEARING CAPACITY OF STEEL REINFORCED RECYCLED CONCRETE COLUMN-STEEL BEAM COMPOSITE FRAME JOINTS
MA Hui, LI San-zhi, LI Zhe, WANG Zhen-shan, LIANG Jiong-feng
Engineering Mechanics, 2018, 35 (7): 176-186.
Abstract ( 57 ) HTML PDF(2354KB) ( 21 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0243
SHPB TEST AND NUMERICAL INVESTIGATION ON THE INERTIA EFFECT OF MORTAR MATERIAL
LI Xiao, FANG Qin, KONG Xiang-zhen, WU Hao
Engineering Mechanics, 2018, 35 (7): 187-193.
Abstract ( 55 ) HTML PDF(505KB) ( 26 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0244
MODEL TESTING STUDY ON THE INFLUENCE OF REVERSE FAULTING ON OVERLAYING SOIL UNDER AN INCLINED GROUND
SHI Ji-sen, LING Dao-sheng, XU Ze-long, HUANG Bo
Engineering Mechanics, 2018, 35 (7): 194-207.
Abstract ( 46 ) HTML PDF(15361KB) ( 25 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0247
DURABILITY OF PRESTRESSED CONCRETE BEAMS UNDER SIMULTANEOUS FLEXURAL LOAD AND CHLORIDE EROSION
CAI Jian, WEI Mu-yang, LUO Chi-yu, CHEN Qing-jun, YI Yuan-ye, ZHANG Fan
Engineering Mechanics, 2018, 35 (7): 208-218,242.
Abstract ( 43 ) HTML PDF(3873KB) ( 19 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0256
STUDY OF LIGHTWEIGHT STEEL HIGH-STRENGTH FOAMED CONCRETE SHEAR WALL COVERED WITH STRAW BOARD SUBJECTED TO AXIAL LOADING
XU Zhi-feng, CHEN Zhong-fan, ZHU Song-song, LIU Ji, YIN Zhi-qi
Engineering Mechanics, 2018, 35 (7): 219-231.
Abstract ( 35 ) HTML PDF(12240KB) ( 13 )
https://doi.org/10.6052/j.issn.1000-4750.2017.03.0262
HYSTERETIC RESISTANCE MECHANISM OF EXPOSED STEEL COLUMN BASES
CUI Yao, LI Hao, LIU Hao, WANG Jing-qiu, TANG Zhen-yun
Engineering Mechanics, 2018, 35 (7): 232-242.
Abstract ( 37 ) HTML PDF(3269KB) ( 18 )
https://doi.org/10.6052/j.issn.1000-4750.2017.04.0288
PARAMETER DESIGN OF TIP RELIEF FOR SPUR GEAR PAIR WITH ADDENDUM MODIFICATION
SUN Yan-ning, MA Hui, FENG Meng-jiao, LI Zhan-wei, WANG Qi-bin
Engineering Mechanics, 2018, 35 (7): 243-248,256.
Abstract ( 31 ) HTML PDF(1420KB) ( 13 )
https://doi.org/10.6052/j.issn.1000-4750.2017.11.0240