Engineering Mechanics ›› 2010, Vol. 27 ›› Issue (7): 237-243,.

• 其他工程学科 • Previous Articles     Next Articles

FINITE ELEMENT ANALYSIS FOR SLIDING ABRASION OF TREAD BLOCKS OF RADIAL TIRE

HE Tao , *LI Zi-ran , WANG Yang   

  1. (Department of Modern Mechanics, Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, China)
  • Received:1900-01-01 Revised:1900-01-01 Online:2010-07-25 Published:2010-07-25

Abstract: The global finite element model of 205/55R16 radial tire with simple longitudinal and lateral tread patterns is constructed. The free rolling and braking processes are simulated using ABAQUS/Standard commercial code. The distribution of stick and slip areas of contact surface under free rolling and braking conditions is investigated. The numerical results indicate that large contact deformations could occur at the front part of tread blocks along the sliding direction. To obtain more accurate stress field and deformation characteristics, a refined meshed finite element model of local tread block is set up. The boundary conditions of local model are derived from the results of global model. Sliding behavior of the tread block is analyzed using ABAQUS/Explicit incorporating thermo-mechanical coupling. Large contact deformations including curling and self contact are presented. In the end, an abrasion process of tread block during the course of ABS (antilock brake system) braking is simulated and the irregular abrasion character along the circumference of tire is presented.

Key words: radial tire, tread block, slip, abrasion, finite element analysis

CLC Number: 

  • TQ336.1
[1] ZHANG Yong-ping, XU Rong-qiao. Analytical analysis for calculating deflections of multilayered composite beams with interlayer slips [J]. Engineering Mechanics, 2018, 35(S1): 22-26.
[2] YANG Feng-li. Structural analysis on a typical transmission tower body section with bolt slippage effects [J]. Engineering Mechanics, 2018, 35(S1): 193-199.
[3] WANG Bing, YOU Hong-xu, LIU Xiao. Working mechanism analysis of steel reinforced recycled aggregate concrete beams after high temperature [J]. Engineering Mechanics, 2018, 35(S1): 161-165,180.
[4] YANG Zhi-jian, LEI Yue-qiang, TAN Ya-wen, LI Guo-chang, WANG Jing-ming. Mechanical performance of improved PHC pile-to-pile cap connection [J]. Engineering Mechanics, 2018, 35(S1): 223-229.
[5] WANG Yuan-yuan, DUAN Shu-jin, NIU Run-ming. Analysis of bending stiffness and contact slip of a steel-concrete composite beam with double actions of combination and lamination [J]. Engineering Mechanics, 2018, 35(S1): 265-269.
[6] ZHENG Shan-suo, ZHANG Xiao-hui, HUANG Wei-zeng, ZHAO Xu-ran. EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON THE SEISMIC BEHAVIOR OF CORRODED PLANE STEEL FRAMES UNDER OFFSHORE ATMOSPHERIC ENVIRONMENT [J]. Engineering Mechanics, 2018, 35(7): 62-73,82.
[7] WANG Da-yang, HAN Qi-hao, ZHANG Yong-shan. EXPERIMENTAL AND ANALYTICAL STUDY OF COMPOSITE STEEL PLATE SHEAR WALL WITH ASSEMBLED MULTI-CONCRETE SLAB [J]. Engineering Mechanics, 2018, 35(7): 83-93,138.
[8] LI Yu-shun, ZHANG Jia-liang, TONG Ke-ting, GUO Jun, WU Pei. STUDY ON INTERFACE SLIP AND DEFORMATION OF BAMBOO-STEEL COMPOSITE I-BEAMS [J]. Engineering Mechanics, 2018, 35(7): 150-158,166.
[9] WANG Jing-xuan, WANG Wen-da, LI Hua-wei. REFINED FINITE ELEMENT ANALYSIS OF PROGRESSIVE COLLAPSE OF PLANAR FRAMES WITH CONCRETE-FILLED STEEL TUBULAR COLUMNS [J]. Engineering Mechanics, 2018, 35(6): 105-114.
[10] ZHAO Lin, ZHAN Yan-yan, CHEN Xu, GE Yao-jun. WIND-INDUCED INTERFERENCE CRITERION FOR GROUPED COOLING TOWERS BASED ON THE INDEX OF REINFORCEMENT RATIO ENVELOPE [J]. Engineering Mechanics, 2018, 35(5): 65-74.
[11] WANG Ni, CHEN Zong-ping, CHEN Yu-liang. ANALYSIS ON SEISMIC PERFORMANCE OF STEEL REINFORCED CONCRETE L-SHAPED COLUMN SPACE CORNER JOINTS [J]. Engineering Mechanics, 2018, 35(5): 180-192.
[12] TAO Mu-xuan, DING Ran, PAN Wen-hao, XU Li-yan, ZHOU Meng, NIE Jian-guo. SOME ADVANCES IN CONVENTIONAL FIBER BEAM-COLUMN MODEL [J]. Engineering Mechanics, 2018, 35(3): 1-21.
[13] JIANG Shui-hua, YANG Jian-hua, YAO Chi, HUANG Jin-song. QUANTITATIVE RISK ASSESSMENT OF SLOPE FAILURE CONSIDERING SPATIAL VARIABILITY OF SOIL PROPERTIES [J]. Engineering Mechanics, 2018, 35(1): 136-147.
[14] CAO Fu-bo, TANG Lei-jie, DING Bing-bing, WANG Chen-xia. STUDY ON BOND-SLIP PROPERTIES BETWEEN STEEL BARS AND RECYCLED CONCRETE AFTER FREEZE-THAW CYCLES [J]. Engineering Mechanics, 2017, 34(增刊): 244-251.
[15] HUANG Han-hui, CHEN Kang-ming, WU Qing-xiong, WANG Qu. STUDY ON FATIGUE CRACKING OF JOINT IN A HALF-THROUGH CFST TRUSS ARCH RIB JOINT [J]. Engineering Mechanics, 2017, 34(增刊): 167-173.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] YUAN Yuan;;XU Ying-qiang;LU Guo-zhi;ZHU Xian-fei. NUMERICAL METHOD FOR RESIDUAL STRESS OF GEAR IN SHAKEDOWN[J]. Engineering Mechanics, 2008, 25(10): 0 -211, .
[2] XING De-jin;LI Zhong-xian. FUZZY CONTROL OF STRUCTURES USING SMA SMART DAMPER[J]. Engineering Mechanics, 2008, 25(10): 0 -228, .
[3] ZHOU Xiao-ping;YANG Hai-qing;ZHANG Yong-xing. ELASTOPLASTIC ANALYSIS OF A FINITE PLATE WITH AN ECCENTRIC CRACK LOADED BY TWO PAIRS OF CONCENTRATED TENSILE FORCES[J]. Engineering Mechanics, 2008, 25(1): 0 -027 .
[4] GONG Yao-qing;BAO Shi-hua. A NEW METHOD FOR FREE VIBRATION ANALYSIS OF SPACE MEGA FRAME OF SUPER TALL BUILDINGS[J]. Engineering Mechanics, 2008, 25(10): 0 -140 .
[5] LIU Jin-xing;DENG Shou-chun;ZHANG Jing;LIANG Nai-gang. BEAM LATTICE MODELING FOR THE FRACTURE OF PARTICLE COMPOSITES[J]. Engineering Mechanics, 2008, 25(10): 0 -037 .
[6] LANG Feng-chao;XING Yong-ming;ZHU Jing. THE MECHANICAL PROPERTIES OF 316L STAINLESS STEEL AFTER SURFACE NANOSTRUCTURE TREATMENT USING NANOINDENTATION[J]. Engineering Mechanics, 2008, 25(10): 0 -071 .
[7] GUO Xiao-gang;;LIU Ren-huai;ZENG Na;JIN Xing. THE MODIFICATION ON SPACE CONFIGURATION OF FLEXIBLE PIPE BY THE SUB-STRUCTURE DISPLACEMENT ITERATION METHOD[J]. Engineering Mechanics, 2008, 25(10): 0 -032 .
[8] XING Jing-zhong;LIU Chun-tu. BUCKLING ANALYSIS OF SPANNING PIPE BURIED IN LINEAR ELASTIC SOIL[J]. Engineering Mechanics, 2008, 25(10): 0 -075 .
[9] LIU Xiang-qing;LIU Jing-bo. TIME HISTORY ANALYSIS OF ELASTO-PLASTIC SEISMIC RESPONSE OF A SUBWAY STATION STRUCTURE WITH ARCHED CROSS SECTION BASED ON FIBER MODEL[J]. Engineering Mechanics, 2008, 25(10): 0 -157 .
[10] HAO Qing-duo;WANG Yan-lei;HOU Ji-lin;OU Jin-ping;. EXPERIMENTAL STUDY ON BOND BEHAVIOR OF GFRP RIBBED REBARS[J]. Engineering Mechanics, 2008, 25(10): 0 -165, .