Engineering Mechanics ›› 2009, Vol. 26 ›› Issue (6): 193-198.

• 其他工程学科 • Previous Articles     Next Articles

CONSTITUTIVE PARAMETRIC EXPERIMENT OF TIRE RUBBER HYPERELASTIC LAWS WITH APPLICATION

GONG Ke-jia , *WEI Yin-tao , YE Jin-xiong   

  1. (State Key Laboratory of Automotive Safety and Energy, Department of Automobile Engineering, Tsinghua University, Beijing 100084, China)
  • Received:1900-01-01 Revised:1900-01-01 Online:2009-06-25 Published:2009-06-25

Abstract: An accurate material parameter of rubber has a key influence in tire FEA. Based on the image analysis, an entire test system was developed and applied to perform a uniaxial tension, biaxial tension and planar tension tests of rubbers usually used by truck tires. The stability, reliability and accuracy of some constitutive laws are researched by the basis of these test results, such as Polynomial, Ogden and Arruda-boyce etc. These results show that the biaxial tension and planar tension test are necessary for the inflation and static loading analysis of a TBR tire. The numerical simulation results prove that the contact pressure and the maximum strain energy density depend on the rubber constitutive parameters seriously and the Polynomial (2 order) and Ogden constitutive laws have better FEA results for tire rubber.

Key words: rubber, hyperelastic, constitutive model, truck tire, finite element

CLC Number: 

  • TQ330.1
[1] ZHAO Bao-qing, WANG Qi-ming, LI Zhi-heng, LEI Zheng. Performance research of FAST ring beam by theoretical and experimental [J]. Engineering Mechanics, 2018, 35(S1): 200-204,211.
[2] WANG Bing, YOU Hong-xu, LIU Xiao. Working mechanism analysis of steel reinforced recycled aggregate concrete beams after high temperature [J]. Engineering Mechanics, 2018, 35(S1): 161-165,180.
[3] ZHANG Wei-jing, ZHANG Chen-cheng. Non-linear analysis of precast RC column with steel bars spliced by compressive sleeves [J]. Engineering Mechanics, 2018, 35(S1): 67-72.
[4] YANG Zhi-jian, LEI Yue-qiang, TAN Ya-wen, LI Guo-chang, WANG Jing-ming. Mechanical performance of improved PHC pile-to-pile cap connection [J]. Engineering Mechanics, 2018, 35(S1): 223-229.
[5] ZHAO Zhi, DAI Kao-shan, MAO Zhen-xi, ZHANG Cai-wei. Failure analyses of a wind turbine tower under ground motions with different frequency characteristics [J]. Engineering Mechanics, 2018, 35(S1): 293-299.
[6] WANG Yu-hang, YU Jie, WU Qiang. ELASTIC-PLASTIC BUCKLING BEHAVIOR OF STEEL MATERIAL UNDER COMPLEX CYCLIC LOADING PATHS [J]. Engineering Mechanics, 2018, 35(7): 24-38.
[7] ZHENG Shan-suo, ZHANG Xiao-hui, HUANG Wei-zeng, ZHAO Xu-ran. EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON THE SEISMIC BEHAVIOR OF CORRODED PLANE STEEL FRAMES UNDER OFFSHORE ATMOSPHERIC ENVIRONMENT [J]. Engineering Mechanics, 2018, 35(7): 62-73,82.
[8] WANG Da-yang, HAN Qi-hao, ZHANG Yong-shan. EXPERIMENTAL AND ANALYTICAL STUDY OF COMPOSITE STEEL PLATE SHEAR WALL WITH ASSEMBLED MULTI-CONCRETE SLAB [J]. Engineering Mechanics, 2018, 35(7): 83-93,138.
[9] XIE Jiang, ZHANG Xue-han, SU Xuan, MOU Hao-lei, ZHOU Jian, FENG Zhen-yu, LAN Yuan-pei. INFLUENCE OF LAYER SEQUENCE ON ENERGY ABSORPTION CHARACTERISTICS OF THIN-WALLED COMPOSITE CIRCULAR TUBES UNDER AXIAL COMPRESSION [J]. Engineering Mechanics, 2018, 35(6): 231-239.
[10] WANG Jing-xuan, WANG Wen-da, LI Hua-wei. REFINED FINITE ELEMENT ANALYSIS OF PROGRESSIVE COLLAPSE OF PLANAR FRAMES WITH CONCRETE-FILLED STEEL TUBULAR COLUMNS [J]. Engineering Mechanics, 2018, 35(6): 105-114.
[11] ZHAO Lin, ZHAN Yan-yan, CHEN Xu, GE Yao-jun. WIND-INDUCED INTERFERENCE CRITERION FOR GROUPED COOLING TOWERS BASED ON THE INDEX OF REINFORCEMENT RATIO ENVELOPE [J]. Engineering Mechanics, 2018, 35(5): 65-74.
[12] WANG Ni, CHEN Zong-ping, CHEN Yu-liang. ANALYSIS ON SEISMIC PERFORMANCE OF STEEL REINFORCED CONCRETE L-SHAPED COLUMN SPACE CORNER JOINTS [J]. Engineering Mechanics, 2018, 35(5): 180-192.
[13] WANG Shan. A STRESS RECOVERY METHOD FOR CRACKS IN KIRCHHOFF PLATE BASED ON THE SYMPLECTIC EIGENSOLUTIONS NEAR THE CRACK TIPS [J]. Engineering Mechanics, 2018, 35(5): 10-16.
[14] ZHAO Xiao-gang, ZHAO Xin, WEN Ze-feng, JIN Xue-song. INFLUENCE OF WHEEL-RAIL ADHESION COEFFICIENT ON TRANSIENT PROPAGATION OF A VERTICAL RAIL CRACK [J]. Engineering Mechanics, 2018, 35(5): 239-245.
[15] HONG Jun-qing, LIU Wei-qing, FANG Hai, ZHANG Fu-bin. STRESS ANALYSIS OF COMPOSITE SANDWICH PANELS UNDER UNIDIRECTIONAL BENDING [J]. Engineering Mechanics, 2018, 35(4): 41-51.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] YUAN Yuan;;XU Ying-qiang;LU Guo-zhi;ZHU Xian-fei. NUMERICAL METHOD FOR RESIDUAL STRESS OF GEAR IN SHAKEDOWN[J]. Engineering Mechanics, 2008, 25(10): 0 -211, .
[2] XING De-jin;LI Zhong-xian. FUZZY CONTROL OF STRUCTURES USING SMA SMART DAMPER[J]. Engineering Mechanics, 2008, 25(10): 0 -228, .
[3] ZHOU Xiao-ping;YANG Hai-qing;ZHANG Yong-xing. ELASTOPLASTIC ANALYSIS OF A FINITE PLATE WITH AN ECCENTRIC CRACK LOADED BY TWO PAIRS OF CONCENTRATED TENSILE FORCES[J]. Engineering Mechanics, 2008, 25(1): 0 -027 .
[4] GONG Yao-qing;BAO Shi-hua. A NEW METHOD FOR FREE VIBRATION ANALYSIS OF SPACE MEGA FRAME OF SUPER TALL BUILDINGS[J]. Engineering Mechanics, 2008, 25(10): 0 -140 .
[5] LIU Jin-xing;DENG Shou-chun;ZHANG Jing;LIANG Nai-gang. BEAM LATTICE MODELING FOR THE FRACTURE OF PARTICLE COMPOSITES[J]. Engineering Mechanics, 2008, 25(10): 0 -037 .
[6] LANG Feng-chao;XING Yong-ming;ZHU Jing. THE MECHANICAL PROPERTIES OF 316L STAINLESS STEEL AFTER SURFACE NANOSTRUCTURE TREATMENT USING NANOINDENTATION[J]. Engineering Mechanics, 2008, 25(10): 0 -071 .
[7] GUO Xiao-gang;;LIU Ren-huai;ZENG Na;JIN Xing. THE MODIFICATION ON SPACE CONFIGURATION OF FLEXIBLE PIPE BY THE SUB-STRUCTURE DISPLACEMENT ITERATION METHOD[J]. Engineering Mechanics, 2008, 25(10): 0 -032 .
[8] XING Jing-zhong;LIU Chun-tu. BUCKLING ANALYSIS OF SPANNING PIPE BURIED IN LINEAR ELASTIC SOIL[J]. Engineering Mechanics, 2008, 25(10): 0 -075 .
[9] LIU Xiang-qing;LIU Jing-bo. TIME HISTORY ANALYSIS OF ELASTO-PLASTIC SEISMIC RESPONSE OF A SUBWAY STATION STRUCTURE WITH ARCHED CROSS SECTION BASED ON FIBER MODEL[J]. Engineering Mechanics, 2008, 25(10): 0 -157 .
[10] HAO Qing-duo;WANG Yan-lei;HOU Ji-lin;OU Jin-ping;. EXPERIMENTAL STUDY ON BOND BEHAVIOR OF GFRP RIBBED REBARS[J]. Engineering Mechanics, 2008, 25(10): 0 -165, .