Engineering Mechanics ›› 2007, Vol. 24 ›› Issue (7): 0-071.

   

SPRINGBACK OF SHEET METAL AFTER PLANE STRAIN STRETCH-BENDING

ZHANG Dong-juan , *CUI Zhen-shan , LI Yu-qiang , RUAN Xue-yu   

  1. (National Die & Mold CAD Engineering Research Center, Shanghai Jiao Tong University, Shanghai 200030, China)
  • Received:1900-01-01 Revised:1900-01-01 Online:2007-07-25 Published:2007-07-25

Abstract: For the springback problem of sheet metal stretch-bending, a mathematical model was proposed based on Hill’s yielding criterion, exponential hardening and plane strain assumption. The model was validated by a stretch-bending example. The effects of stretching force per unit width, die profile radius, friction and anisotropy on the springback were studied. The results from the proposed model indicate that only if the shift distance of neutral surface exceeds one-fourth of sheet thickness, the increase of stretching force can control the springback effectively. Furthermore, the larger the bending radius, the more effective the increase of binder force in controling the sheet springback. However, the stretching force cannot increase without limit. Its calculation criterion is that the effective strain at the outer sheet layer is not greater than the material limit strain. It also shows that with the increase of stretching force, the friction has much larger influence on the sheet springback. Besides, the anisotropy also has effect on the sheet springback of stretch-bending. Comparison with FE simulation results shows that the predicted results by the mathematical model consist well with those by FEM.

Key words: plane strain, yielding criterion, exponential hardening, stretch-bending, springback, anisotropy

CLC Number: 

  • O34
[1] YAO Yang-ping, TIAN Yu, LIU Lin. THREE-DIMENSIONAL ANISOTROPIC UH MODEL FOR SANDS [J]. Engineering Mechanics, 2018, 35(3): 49-55.
[2] YING Hong-wei, WANG Xiao-gang, ZHANG Jin-hong, ZHOU Jian, ZHU Cheng-wei. LIMIT EQUILIBRIUM ANALYSIS ON STABILITY AGAINST BASAL HEAVE OF EXCAVATION IN ANISOTROPY SOFT CLAY [J]. Engineering Mechanics, 2016, 33(9): 131-137.
[3] LI Xue-feng, HUANG Mao-song, QIAN Jian-gu. STRAIN LOCALIZATION ANALYSIS OF ANISOTROPIC SANDS BASED ON NON-COAXIAL THEORY [J]. Engineering Mechanics, 2014, 31(3): 205-211.
[4] LIN Ce, PENG Yan, SUN Jian-liang. THEORETIC ANALYSIS ON SPRINGBACK IN BENDING CONSIDERING THE INITIAL RESIDUAL STRESS [J]. Engineering Mechanics, 2013, 30(9): 28-33.
[5] YIN Jie. A MODIFIED CAM CLAY MODEL FOR STRUCTURED SOFT CALYS [J]. Engineering Mechanics, 2013, 30(1): 190-197.
[6] LIU Zhi-qin,YU Dong-ming. ELASTOPLASTIC STRESS AND DISPLACEMENT ANALYTICAL SOLUTIONS TO DEEP-BURIED CIRCULAR TUNNELS CONSIDERING INTERMEDIATE PRINCIPAL STRESS AND DILATANCY [J]. Engineering Mechanics, 2012, 29(8): 289-296.
[7] CHEN Zhi-ying, LIU Lin-qiang, DONG Xiang-huai. GTN MESO-DAMAGE MODEL BASED ON DIFFERENT HARDENING RULES AND ITS APPLICATION FOR SPRINGBACK FINITE ELEMENT ANALYSIS IN SHEET METAL FORMING [J]. Engineering Mechanics, 2012, 29(7): 305-312.
[8] ZHAO Ying. FULLY COUPLED DUAL-POROSITY MODEL FOR OIL-WATER TWO-PHASE FLOW IN ANISOTROPIC FORMATIONS [J]. Engineering Mechanics, 2012, 29(2): 222-229.
[9] WANG Xiao-gui,HU Tao,XU Feng. STRESS SINGULARITIES IN TIPS OF THREE-DIMENSIONAL ANISOTROPIC MULTI-MATERIAL WEDGES [J]. Engineering Mechanics, 2012, 29(11): 21-025,032.
[10] WANG Kui-hua;LIU Kai;WU Wen-bing;WANG Ning. EFFECT OF CONE ANGLE ON AXIAL DYNAMIC RESPONSE OF FICTITIOUS SOIL PILE [J]. Engineering Mechanics, 2011, 28(9): 129-136,.
[11] WAN Li;LIU Wei-qing;ZHOU Ding;FANG Hai. FAILURE ANALYSIS OF SANDWICH BEAMS WITH BALSA CORE [J]. Engineering Mechanics, 2011, 28(2): 134-140.
[12] LIU Lin-chao;YANG Xiao. LATERAL VIBRATION OF PILE GROUPS IN SOIL BASED ON PLANE STRAIN MODEL [J]. Engineering Mechanics, 2010, 27(7): 168-174.
[13] MA Jing;HUANG Zai-xing. RESEARCH ON THE VISCO-PLASTIC BEHAVIORS OF SnAgCu ALLOY UNDER VARYING TEMPRATURE CONDITIONS BY ANISOTROPY HARDENING TENSOR MODEL [J]. Engineering Mechanics, 2010, 27(5): 166-172.
[14] WU Jian-ying;LI Jie. MATHEMATICAL AND THERMODYNAMICAL REPRESENTATIONS OF ANISOTROPIC DAMAGE MODELS FOR CONCRETE [J]. Engineering Mechanics, 2009, 26(增刊Ⅱ): 133-147.
[15] CHEN Zhi-ying;DONG Xiang-huai. DUCTILE DAMAGE ANALYSIS FOR FRACTURE IN SHEET METAL FORMING BASED ON GTN MESOSCOPIC DAMAGE MODEL [J]. Engineering Mechanics, 2009, 26(7): 238-244.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] YUAN Yuan;;XU Ying-qiang;LU Guo-zhi;ZHU Xian-fei. NUMERICAL METHOD FOR RESIDUAL STRESS OF GEAR IN SHAKEDOWN[J]. Engineering Mechanics, 2008, 25(10): 0 -211, .
[2] XING De-jin;LI Zhong-xian. FUZZY CONTROL OF STRUCTURES USING SMA SMART DAMPER[J]. Engineering Mechanics, 2008, 25(10): 0 -228, .
[3] ZHOU Xiao-ping;YANG Hai-qing;ZHANG Yong-xing. ELASTOPLASTIC ANALYSIS OF A FINITE PLATE WITH AN ECCENTRIC CRACK LOADED BY TWO PAIRS OF CONCENTRATED TENSILE FORCES[J]. Engineering Mechanics, 2008, 25(1): 0 -027 .
[4] GONG Yao-qing;BAO Shi-hua. A NEW METHOD FOR FREE VIBRATION ANALYSIS OF SPACE MEGA FRAME OF SUPER TALL BUILDINGS[J]. Engineering Mechanics, 2008, 25(10): 0 -140 .
[5] LIU Jin-xing;DENG Shou-chun;ZHANG Jing;LIANG Nai-gang. BEAM LATTICE MODELING FOR THE FRACTURE OF PARTICLE COMPOSITES[J]. Engineering Mechanics, 2008, 25(10): 0 -037 .
[6] LANG Feng-chao;XING Yong-ming;ZHU Jing. THE MECHANICAL PROPERTIES OF 316L STAINLESS STEEL AFTER SURFACE NANOSTRUCTURE TREATMENT USING NANOINDENTATION[J]. Engineering Mechanics, 2008, 25(10): 0 -071 .
[7] GUO Xiao-gang;;LIU Ren-huai;ZENG Na;JIN Xing. THE MODIFICATION ON SPACE CONFIGURATION OF FLEXIBLE PIPE BY THE SUB-STRUCTURE DISPLACEMENT ITERATION METHOD[J]. Engineering Mechanics, 2008, 25(10): 0 -032 .
[8] XING Jing-zhong;LIU Chun-tu. BUCKLING ANALYSIS OF SPANNING PIPE BURIED IN LINEAR ELASTIC SOIL[J]. Engineering Mechanics, 2008, 25(10): 0 -075 .
[9] LIU Xiang-qing;LIU Jing-bo. TIME HISTORY ANALYSIS OF ELASTO-PLASTIC SEISMIC RESPONSE OF A SUBWAY STATION STRUCTURE WITH ARCHED CROSS SECTION BASED ON FIBER MODEL[J]. Engineering Mechanics, 2008, 25(10): 0 -157 .
[10] HAO Qing-duo;WANG Yan-lei;HOU Ji-lin;OU Jin-ping;. EXPERIMENTAL STUDY ON BOND BEHAVIOR OF GFRP RIBBED REBARS[J]. Engineering Mechanics, 2008, 25(10): 0 -165, .