Engineering Mechanics ›› 2019, Vol. 36 ›› Issue (1): 146-154,164.doi: 10.6052/j.issn.1000-4750.2017.11.0815

Previous Articles     Next Articles

THEORETICAL AND EXPERIMENTAL INVESTIGATION ON IMMEDIATE STIFFNESS OF UHPC BEAMS

XU Ming-xue1, LIANG Xing-wen1, YU Jing1, LI Lin2   

  1. 1. College of Civil Engineering, Xi'an University of Architecture and Technology, Xi'an, Shaanxi 710055, China;
    2. Shaanxi Jianyan Structural Engineering Co., Ltd., Xi'an, Shaanxi 710082, China
  • Received:2017-11-02 Revised:2018-03-28 Online:2019-01-29 Published:2019-01-10

Abstract: Ultra high performance concrete (UHPC) is a remarkable material exhibiting higher strength, toughness, durability and anti-impact property when compared with conventional concrete. In the study of deformation and stiffness of UHPC beams, the immediate stiffness calculation theory has not yet formed a unified method. In this study, the UHPC immediate stiffness calculation method was derived by using the effective inertia moment method and the stiffness analysis method respectively combined with the material properties of UHPC. Through experimental investigations of 12 UHPC test beams, it is found that the immediate stiffness was better calculated by the two immediate stiffness calculation methods and the accuracy satisfied engineering requirements. Compared with the stiffness analysis method, the values calculated from the effective inertia moment method were closer to experimental values.

Key words: ultra high performance concrete, immediate stiffness, effective inertia moment method, stiffness analysis method, experimental investigation

CLC Number: 

  • TU375.1
[1] 李庆华, 徐世烺. 超高韧性水泥基复合材料基本性能和结构应用研究进展[J]. 工程力学, 2009, 26(增刊2):23-67. Li Qinghua, Xu Shilang. Performance and appliaction of utral high toughness cementitious composite[J]. Engineering Mechanics, 2009, 26(Suppl 2):23-67. (in Chinese)
[2] Russell H G, Graybeal B A. Ultra-high performance concrete:A State-of-the-art report for the bridge community[R]. Research, Development, and Technology Turner-fair Bank Highway Research Center, McLean, Virginia, 2013:16-19.
[3] 金凌志, 李月霞, 祁凯能, 等. 高强钢筋RPC简支梁抗剪承载力及延性研究[J]. 工程力学, 2015, 32(增刊1):209-214. Jin Lingzhi, Li Yuexia, Qi Kaineng, et al. Research on shear bearing capacity and ductility of high strength reinforced RPC beam[J]. Engineering Mechanics, 2015, 32(Suppl 1):209-214. (in Chinese)
[4] 徐世烺, 王洪昌. 超高韧性水泥基复合材料与钢筋粘结本构关系的试验研究[J]. 工程力学, 2008, 25(11):53-61. Xu Shilang, Wang Hongchang. Experimental Study on bond-slip between ultra high toughness cementitious composites and steel bar[J]. Engineering Mechanics, 2008, 25(11):53-61. (in Chinese)
[5] 邓明科, 卜新星, 潘姣姣, 等. 型钢高延性混凝土短柱抗震性能试验研究[J]. 工程力学, 2017, 34(01):163-170. Deng Mingke, Bu Xinxing, Pan Jiaojiao, et al. Experimental study on seismic behavior of steel reinforced high ductile concrete short columns[J]. Engineering Mechanics, 2017, 34(01):163-170. (in Chinese)
[6] 赖建中, 朱耀勇, 谭剑敏. 超高性能混凝土在埋置炸药下的抗爆试验及数值模拟[J]. 工程力学, 2016, 33(5):193-199. Lai Jianzhong, Zhu Yaoyong, Tan Jianmin. Experimental and simulation of utra high performance concrete subjected to blast by embedded explosive[J]. Engineering Mechanics, 2016, 33(5):193-199. (in Chinese)
[7] Yoo D Y, Banthia N, Yoon Y S. Predicting service deflection of ultra-high-performance fiber-reinforced concrete beams reinforced with GFRP bars[J]. Composites Part B Engineering, 2016, 99(6):381-397.
[8] Ashour S, Mahmood K, Wafa F. Service load deflections of high-strength fiber reinforced concrete beams[J]. Journal of King Abdulaziz University Engineering Sciences, 2000, 8(2):21-46.
[9] ACI 318-95, Building code requirements for reinforced concrete[S]. Michigan, American Concrete Institute, 1995.
[10] 李莉. 活性粉末混凝土梁受力性能及设计方法研究[D]. 哈尔滨:哈尔滨工业大学, 2010. Li Li. Mechanical behavior and design method for reactive powder concrete beams[D]. Harbin:Harbin Institute of Technology, 2010. (in Chinese)
[11] GB 50010-2010,混凝土结构设计规范[S]. 北京:中国建筑工业出版社, 2010. GB 50010-2010, Code for design of concrete structures[S]. Beijing:China Architecture Industry Press, 2010. (in Chinese)
[12] 邓宗才, 肖锐, 徐海宾, 等. 高强钢筋超高性能混凝土梁的使用性能研究[J]. 哈尔滨工程大学学报, 2015, 36(10):1335-1340. Deng Zongcai, Xiao Rui, Xu Haibin, et al. Serviceability research of ultra high performance concrete beams reinforced with high strength steel bars[J]. Journal of Harbin Engineering University, 2015, 36(10):1335-1340. (in Chinese)
[13] Abrishambaf A, Pimentel M, Nunes S. Influence of fibre orientation on the tensile behaviour of ultra-high performance fibre reinforced cementitious composites[J]. Cement & Concrete Research, 2017, 97:28-40.
[14] Krenchel H, ‘Fiber spacing and specific fiber surface’, in ‘Testing and Test Methods of Fiber Cement Composites’[C]. Proceedings of the RILEM Symposium, Construction Press Ltd., Lancaster 1978:69-79.
[15] Naaman A E, Reinhardt H W. High performance fiber reinforced cement composites[M]. London:Springer Publishing Company, 1995.
[16] Hu A X, Liang X W, Yu J, et al. Tensile characteristics of ultra high performance concrete[J]. Magazine of Concrete Research, 2018, 70(6):314-324.
[17] 蓝宗建, 丁大钧. 钢筋混凝土受弯构件裂缝宽度的计算[J]. 东南大学学报(自然科学版), 1985, 15(2):64-72. Lan Zongjian, Ding Dajun. Calculation for crack width of reinforced concrete members with flexure[J]. Journal of Southeast University (Natural Science Edition), 1985, 15(2):64-72.(in Chinese)
[18] GB/T 50152-2012, 混凝土结构试验方法标准[S]. 北京:中国建筑工业出版社, 2012. GB/T 50152-2012, Standard for test method of concrete structures[S]. Beijing:China Architecture Industry Press, 2012. (in Chinese)
[19] 李志武, 许金余, 张国喜, 等. 利用纤维增强机理对纤维临界体积率的理论推导[C]. 第十三届纤维混凝土学术会议暨第二届海峡两岸三地混凝土技术研讨会, 南京, 中国土木工程学会, 2010:522-528. Li Zhiwu, Xu Jinyu, Zhang Guoxi, et al. The theoretical deduction of the critical fiber volume quantity using the mechanism of fiber reinforced concrete[C]. Seminar on concrete technology in three places across the Taiwan straits. Nanjing, Civil Engineering Institute of China, 2010:522-528. (in Chinese)
[20] Ali H M, Hamad L N T. First diagonal cracking and ultimate shear of reactive powder concrete T-beams without stirrups[J]. Journal of Engineering and Development, 2014, 18(5):149-164.
[1] GUO Yan-lin, TONG Jing-zhong, ZHOU Peng. RESEARCH PROGRESS OF BUCKLING RESTRAINED BRACES: TYPES, DESIGN METHODS AND APPLICATIONS [J]. Engineering Mechanics, 2016, 33(9): 1-14.
[2] CHENG Liang, ZHU Mei-chun, LI Guo-qiang. EXPERIMENTAL STUDY ON POST-ELEVATED TEMPERATURE MECHANICAL PROPERTIES OF BUTT-WELDED CONNECTIONS [J]. Engineering Mechanics, 2015, 32(增刊): 298-303.
[3] WANG Ya-dong|YUAN Xu-long,ZHANG Yu-wen. EXPERIMENTAL INVESTIGATION OF CAVITATION CHARACTERISTICS OF SUB-LAUNCHED MISSILE MODELS IN WATER TUNNEL [J]. Engineering Mechanics, 2013, 30(4): 442-447.
[4] XING Bao-ying, HE Xiao-cong, TANG Yong, ZHENG Jun-chao. INFLUENCE OF DISTRIBUTION TYPES OF RIVETS ON THE MECHANICAL PROPERTIES OF SELF-PIERCING RIVETING JOINTS [J]. Engineering Mechanics, 2013, 30(12): 280-285.
[5] WANG Chun-gang,ZHANG Zhuang-nan,ZHANG Yao-chun. EXPERIMENTAL INVESTIGATION ON CHANNEL COLUMNS WITH COMPLEX EDGE STIFFENERS AND INTERMEDIATE STIFFENERS UNDER AXIAL COMPRESSION [J]. Engineering Mechanics, 2013, 30(1): 221-228,254.
[6] SHI Gang,BAN Hui-yong,SHI Yong-jiu,WANG Yuan-qing. OVERVIEW OF RESEARCH PROGRESS FOR HIGH STRENGTH STEEL STRUCTURES [J]. Engineering Mechanics, 2013, 30(1): 1-13.
[7] YANG Wen-xia, FANG You-zhen, GU Qiang, SUN Guo-hua, MA Ji. SEISMIC PERFORMANCE STUDY OF PEC COLUMNS FABRICATED WITH THIN-WALLED BUILT-UP SECTION BY FULL SCALE [J]. Engineering Mechanics, 2012, 29(8): 108-115.
[8] LI Zhi-bin, YU Ji-lin, GUO Liu-wei. EXPERIMENTAL INVESTIGATIONS ON THE ENERGY ABSORPTION BEHAVIOR OF ALUMINUM TUBES WITH INDUCTIVE STRUCTURES SUBJECTED TO AXIAL LOADING [J]. Engineering Mechanics, 2012, 29(6): 346-352.
[9] LIU Pei;GUO Meng;LI Ting;YAO Qian-feng. EXPERIMENTAL INVESTIGATION ON SEISMIC BEHAVIOR OF MULTI-GRID COMPOSITE WALL REINFORCED BY LIGHT STEEL [J]. Engineering Mechanics, 2012, 29(1): 128-133.
[10] RONG Qiang;SHENG Yan;CHENG Wen-rang. EXPERIMENTAL INVESTIGATION AND MECHANICAL MODEL OF SLIDING ISOLATION BEARINGS [J]. Engineering Mechanics, 2010, 27(12): 40-045.
[11] SHI Qi-yin;FAN Xu-hong;WOLFGANG Froncke. EXPERIMENTAL INVESTIGATIONS ON AN INNOVATIVE FORM OF STEEL-ENCASED CONCRETE COMPOSITE BEAMS [J]. Engineering Mechanics, 2007, 24(12): 0-092,.
[12] ZHAO Qi-lin;LI Zhi-gang;CHEN Hao-sen. THEORETICAL AND EXPERIMENTAL INVESTIGATIONS ON DAMAGE IDENTIFICATION OF CONCRETE BRIDGES [J]. Engineering Mechanics, 2006, 23(S1): 128-133.
[13] CHENG Li-sha;CHENG Xiao-dong;YE Gui-ru. EXPERIMENTAL STUDY AND THREE-DIMENSIONAL NONLINEAR ANALYSIS OF THE ULTIMATE BEARING CAPACITIES OF RC BEAMS STRENGTHENED BY CFRP [J]. Engineering Mechanics, 2005, 22(6): 175-180.
[14] GUAN Xin-chun;LI Jin-hai;OU Jin-ping. EXPERIMENTAL STUDY OF FULL-SCALE MAGNETORHEOLOGICAL FLUID DAMPER PERFORMANCE [J]. Engineering Mechanics, 2005, 22(6): 207-211.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
No Suggested Reading articles found!