Engineering Mechanics ›› 2018, Vol. 35 ›› Issue (9): 188-196.doi: 10.6052/j.issn.1000-4750.2017.06.0438

Previous Articles     Next Articles

DYNAMIC MECHANICAL PROPERTY STUDY OF BREAK RINGS IN FLEXIBLE PROTECTIVE SYSTEM

QI Xin1,2, XU Hu1, YU Zhi-xiang1, ZHAO Lei1, MENG Qing-cheng3   

  1. 1. School of Civil Engineering. Southwest Jiaotong University, Chengdu 610031, China;
    2. State Key Laboratory of Geohazard Prevention and Geoenvironment Protection, Chengdu 610059, China;
    3. School of Civil Engineering and Architecture. Southwest Petroleum University, Chengdu 610500, China
  • Received:2017-06-06 Revised:2017-09-29 Online:2018-09-29 Published:2018-09-15

Abstract: Break rings are important energy dissipation components in a flexible protective system, which plays a key role in energy dissipation and over-load protection for the system. The single break ring and the break rings groups of GS-8002 are conducted on quasi-static tests, on the dynamic tests based on weights, and on full-scale impact tests. And then the deformation and mechanical characteristics of the break rings in different test conditions are analyzed. It is shown that:under the influence of the dynamic load, the staring force increases, the parallel break rings group had the largest increase. The tensile strength curve of the break rings has obvious pulse characteristics. The series break rings group is more prominent. The deformation of break ring near the side of the whole system is relatively large, and which near the fixed end is small. The pulse characteristics of parallel break rings groups is similar to that of the single. Then a four-line mechanical model of the break ring considering the dynamic characteristics is proposed, which can better reflect the working performance characteristics of break rings. Based on those analysis models, the equivalent relation is developed between the performance indexes of GS-8002 in different test conditions, which is convenient for the design and application in pertinent practical engineering.

Key words: flexible protective system, break ring, test study, mechanical model, equivalent relation

CLC Number: 

  • P642.22
[1] Muraishi H, Samizo M, Sugiyama T. Development of a flexible low-energy rockfall protection fence[J]. Quarterly Report of Rtri, 2005, 46(3):161-166.
[2] 崔廉明. 被动防护系统中消能件的力学性能研究[D]. 重庆:后勤工程学院, 2014. Cui Lianming. Study on the mechanical properties of the energy dissipator used in the passive protection system[D]. Chongqing:Logistical Engineering University, 2014. (in Chinese)
[3] EOTA(2008). Guideline for the European technical approval of falling rock protection kits[S]. Tech. Rep. European Organization for Technical Approvals (ETAG 27) February, Brussels, 2008.
[4] TB/T 3089-2004, 铁路沿线斜坡柔性安全防护网[S]. 北京:中国铁道出版社, 2004. TB/T 3089-2004, The flexible safety net for protection of slope along the line[S]. Beijing:China Railway Publish House, 2004. (in Chinese)
[5] JT/T 528-2004, 公路边坡柔性防护系统构件[S]. 北京:人民交通出版社, 2004. JT/T 528-2004, Component of flexible system for protecting highway slope[M]. Beijing:China Communications Press, 2004. (in Chinese)
[6] Castro-Fresno, Díaz D D C, Nieto J J, et al. Comparative analysis of mechanical tensile tests and the explicit simulation of a brake energy dissipater by FEM[J]. International Journal of Nonlinear Sciences & Numerical Simulation, 2009, 10(8):1059-1085.
[7] Gentilini C, Gottardi G, Govoni L, et al. Design of falling rock protection barriers using numerical models[J]. Engineering Structures, 2013, 50(3):96-106.
[8] Bertrand D, Trad A, Limam A, et al. Full-scale dynamic analysis of an innovative rockfall fence under impact using the discrete element method:from the local scale to the structure scale[J]. Rock Mechanics and Rock Engineering, 2012, 45(5):885-900.
[9] Lambert S, Nicot F. Multi-scale analysis of an innovative flexible rockfall barrier[M]//Rockfall Engineering. John Wiley & Sons, Inc. 2013:303-342.
[10] Fulde M, Müller M. Development of a modular brake element for the use in modern rockfall catchment fences[C]. North Conway, United States:64th Highway Geology Symposium, 2013:297-314.
[11] Castanon Jano L, Blanco Fernandez E, Castro Fresno D, et al. Energy dissipating devices in falling rock protection barriers[J]. Rock Mechanics & Rock Engineering, 2016:1-17.
[12] 赵世春, 余志祥, 赵雷, 等. 被动防护网系统强冲击作用下的传力破坏机制[J]. 工程力学, 2016, 33(10):24-34. Zhao Shichun, Yu Zhixiang, Zhao Lei, et al. Damage mechanism of rockfall barriers under strong impact loading.[J], Engineering Mechanics, 2016, 33(10):24-34. (in Chinese)
[1] ZHOU Ying, GONG Shun-ming. STUDY ON NONLINEAR CHARACTERISTICS AND MECHANICAL MODEL OF HYBRID NONLINEAR VISCOLEASTIC DAMPER [J]. Engineering Mechanics, 2018, 35(6): 132-143.
[2] LU Ting-ting, LIANG Xing-wen. FORCE-DISPLACEMENT MECHANICAL MODEL OF FRC BEAM-COLUMN-SLAB SUBASSEMBLIES [J]. Engineering Mechanics, 2018, 35(2): 133-143.
[3] SUN Zhen-yu, ZHANG Ding-li, FANG Qian, TAI Qi-min, YU Fu-cai. RESEARCH ON THE MECHANICAL PROPERTY OF THE SURROUNDING ROCK OF DEEP-BURIED TUNNEL BASED ON THE ADVANCED REINFORCEMENT [J]. Engineering Mechanics, 2018, 35(2): 92-104.
[4] DU Min, JIN Liu, LI Dong, DU Xiu-li. MESOSCOPIC SIMULATION STUDY OF THE INFLUENCE OF AGGREGATE SIZE ON MECHANICAL PROPERTIES AND SPECIMEN SIZE EFFECT OF CONCRETE SUBJECTED TO SPLITTING TENSILE LOADING [J]. Engineering Mechanics, 2017, 34(9): 54-63.
[5] LI Dong, JIN Liu, DU Xiu-li, LU Ai-zhen. MESOSCOPIC SIMULATION OF THE GLOBAL MECHANICAL PROPERTIES OF REINFORCED CONCRETE COLUMN SUBJECTED TO ECCENTRIC COMPRESSIVE LOADING [J]. Engineering Mechanics, 2016, 33(7): 65-72.
[6] XU Zhi-qian, YAN Xiang-zhen, YANG Xiu-juan. INTEGRITY EVALUATION METHOD FOR NON-API CASING CONNETIONS [J]. Engineering Mechanics, 2016, 33(2): 188-199.
[7] LIU Si-jin, FENG Kun, HE Chuan, HE Zheng-shu. STUDY ON THE BENDING MECHANICAL MODEL OF SEGMENTAL JOINT IN SHIELD TUNNEL WITH LARGE CROSS-SECTION [J]. Engineering Mechanics, 2015, 32(12): 215-224.
[8] ZHANG Long, LIU Yao-ru, YANG Qiang, YANG Ruo-qiong. RESEARCH ON GEOMECHANICAL MODEL TEST OF DAGANGSHAN HIGH ARCH DAM BASED ON BLOCK MASONRY TECHNIQUE [J]. Engineering Mechanics, 2014, 31(8): 53-62.
[9] YU Hai-tao, YUAN Yong, LIU Hong-zhou, LI Zhen-xin. MECHANICAL MODEL AND ANALYTICAL SOLUTION FOR STIFFNESS IN THE JOINTS OF AN IMMERSED-TUBE TUNNEL [J]. Engineering Mechanics, 2014, 31(6): 145-150.
[10] REN Wen-jie, LI Hong-nan. ANALYSES OF STATIONARY RANDOM VIBRATION OF SINGLE-DEGREE-OF-FREEDOM STRUCTURE WITH SHAPE MEMORY ALLOY DAMPER SUBJECTED TO GAUSSIAN WHITE NOISE EXCITATION [J]. Engineering Mechanics, 2014, 31(2): 35-40.
[11] CAI Yi-zhou,YE Yong. RESEARCHES ON VISCOELASTIC MECHANICS BEHAVIOR OF ASPHALT SAND MIXTURE [J]. Engineering Mechanics, 2012, 29(增刊Ⅱ): 182-185.
[12] ZHANG Cheng-hua, HUANG Wei, ZHAO Dong, ZHANG Yin, HOU Li-na. STUDY ON ECO-COMPOSITE WALL BASED ON COMPOSITE MATERIAL MECHANICAL MODEL [J]. Engineering Mechanics, 2012, 29(8): 249-254.
[13] ZHANG Qian, QU Chuan-yong, HUANG Tian, CAI Zong-xi, KANG Yi-lan, DAI Bin, LENG Jian-zhong, WANG Yan-qun. MECHANICS ANALYSIS AND LOAD PREDICTION OF SHIELD TUNNEL MACHINE DURING EXCAVATION [J]. Engineering Mechanics, 2012, 29(7): 291-297.
[14] DU Xiu-li;JIN Liu. MECHANICAL PROPERTY RESEARCH ON CONCRETE BASED ON RANDOM MULTI-SCALE MECHANICAL MODEL [J]. Engineering Mechanics, 2011, 28(增刊I): 151-155.
[15] XIE Fu-zhe;SHU Gan-ping. RESEARCH ON THE MODEL METHOD OF PROGRESSIVE COLLAPSE ANALYSIS OF STEEL FRAME STRUCTURES [J]. Engineering Mechanics, 2011, 28(10): 34-040.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] HU Xiao-rong;YU Mao-hong. RESEARCH ON TRIPLE-SHEAR YIELD CRITERION FOR MATERIALS[J]. Engineering Mechanics, 2006, 23(4): 6 -11 .
[2] XIONG Tie-hua;CHANG Xiao-lin. APPLICATION OF RESPONSE SURFACE METHOD IN SYSTEM RELIABILITY ANALYSIS[J]. Engineering Mechanics, 2006, 23(4): 58 -61 .
[3] GU Zhi-ping;HE Xing-suo;FANG Tong. EFFECT OF THE DIFFERENTIAL LINKING CONDITION ON SUB-HARMONIC RESONANCE[J]. Engineering Mechanics, 2006, 23(4): 62 -66 .
[4] JIA Chao;ZHANG Chu-han;JIN Feng;CHENG Wei-shuai. SENSITIVITY ANALYSIS OF STRUCTURAL RELIABILITY TO RANDOM VARIABLES AND FAILURE-MODE CORRELATION FACTORS AND ITS APPLICATION IN ENGINEERING[J]. Engineering Mechanics, 2006, 23(4): 12 -16,1 .
[5] LI Yi;ZHAO Wen;ZHANG Yan-nian. AN ACCELERATING ALGORITHM FOR RELIABILITY ANALYSIS OF SYSTEM STIFFNESS[J]. Engineering Mechanics, 2006, 23(3): 17 -20 .
[6] YANG Pu;LIU Ying-hua;YUAN Hong-yan;CEN Zhang-zhi. A MODIFIED ELASTIC COMPENSATION METHOD FOR THE COMPUTATION OF LIMIT LOADS[J]. Engineering Mechanics, 2006, 23(3): 21 -26 .
[7] LI Qing-xiang;SUN Bing-nan;. AERODYNAMIC STABILITY ANALYSIS OF SMALL CURVED MEM- BRANE IN UNIFORM FLOW[J]. Engineering Mechanics, 2006, 23(4): 39 -44,5 .
[8] YANG Run-lin;YAN Wei-ming;ZHOU Xi-yuan;DONG Di;NIU Dong-xu;LIU Xi-hui. STUDY ON VIBRATION CONTROL OF STRUCTURES BASED ON THE OFF-AND-TOWARDS-EQUILIBRIUM CONTROL STRATEGY[J]. Engineering Mechanics, 2006, 23(5): 1 -8 .
[9] SUI Yun-kang;PENG Xi-rong;YE Hong-ling. TOPOLOGY OPTIMIZATION OF CONTINUUM STRUCTURE WITH GLOBALIZATION OF STRESS CONSTRAINTS BY ICM METHOD[J]. Engineering Mechanics, 2006, 23(7): 1 -7 .
[10] WANG An-wen. ELASTIC DYNAMIC BUCKLING OF THIN CYLINDRICAL SHELLS SUBJECT TO AXIAL STEP LOAD[J]. Engineering Mechanics, 2006, 23(5): 40 -45 .