Engineering Mechanics ›› 2018, Vol. 35 ›› Issue (7): 104-116.doi: 10.6052/j.issn.1000-4750.2017.03.0200

Previous Articles     Next Articles

STUDY ON DESIGN METHOD OF STRONG COLUMN AND WEAK BEAM BASED ON FRAGILITY FOR PRESTRESSED CONCRETEFRAME STRUCTURES

ZHANG Yao-ting, YANG Li, ZHANG Jiang, ZHANG Cheng-cheng   

  1. Huazhong University of Science and Technology School of Civil Engineering and Mechanics, Hubei, Wuhan 430074, China
  • Received:2017-03-15 Revised:2017-12-01 Online:2018-07-25 Published:2018-07-26

Abstract: According to the related researches and analyzes of earthquake damage, the RC frame structure designed by current standard is difficult to achieve strong column-weak beam mechanism. The Chinese specification for aseismic design of PC structures (04) based on the aseismic code (01) lags behind the aseismic code (10). The study on PC strong column-weak beam mechanism is necessary. Firstly, a new method that MAFC (the moment amplification factor of column ends) for each aseismic level of PC frame structure was adjusted according to the actual beam ends bending capacity. Secondly, to define the reasonable value of MAFC, four multi-layer PC frame structures at 1st, 2nd and 3rd anti-seismic grade were designed according to the aseismic design of PC structures (04). 4 nonlinear analysis models were established in OpenSees, which implies that the stress of longitudinal bars of columns end sections except the first floor is below the yield stress under strong earthquake excitation. 35 seismic waves were selected for each frame to analyze the earthquake response, and the statistical analyses of MAFC demand were carried out. The results show that the PC frame MAFC for interior and exterior joints are 1.05 and 1.0 respectively at 3rd anti-seismic grade, 1.25 and 1.15 respectively at 2nd anti-seismic grade, 1.3 and 1.2 respectively at 1st anti-seismic grade. Finally, two PC frame structures were redesigned according to the new method to verify the practicability of the new design method and MAFC by IDA-based vulnerability analysis.

Key words: prestressed concrete frame, strong column and weak beam, moment amplification factor of column end, seismic performance evaluation, vulnerability analysis

CLC Number: 

  • TU378.4
[1] Paulay T. Developments in the design of ductile reinforced concrete frames[J]. Bulletin of the New Zealand National Society For Earthquake Engineering, 1979, 12(1):35-48.
[2] Paulay T, Priestley M J N. Seismic design of reinforced concrete and masonry buildings[M]. Canada:Wiley-Interscience, 1992.
[3] Zahid M Z A M, Robert D, Shahrin F. An evaluation of overstrength factor of seismic designed low rise RC buildings[J]. Procedia Engineering, 2013, 53(7):48-51
[4] Taïeb B, Sofiane B. Accounting for ductility and over strength in seismic design of reinforced concrete structures[C]//Proceedings of the 9th International Conference on Structural Dynamics. Porto Portugal, EURODYN, 2014:311-314.
[5] 马宏旺, 陈晓宝. 钢筋混凝土框架结构强柱弱梁设计的概率分析[J]. 上海交通大学学报, 2005, 39(5):723-726. Ma Hongwang, Chen Xiaobao. Probability analysis for strong column-weak beam design of reinforced concrete frames[J]. Journal of Shanghai Jiaotong University, 2005, 39(5):723-726. (in Chinese)
[6] 张耀庭, 卢怡思, 杜晓菊, 卢杰志. 柱端弯矩增大系数对PC框架结构抗震性能影响的研究[J]. 湖南大学学报(自然科学版), 2014, 41(11):37-47. Zhang Yaoting, Lu Yisi, Du Xiaoju, Lu Jiezhi. Study on the effect of moment magnifying coefficient at column ends on the seismic capacity of prestressed concrete frame[J]. Journal of Hunan University (Natural Sciences), 2014, 41(11):37-47. (in Chinese)
[7] 张睿. 基于梁铰机制的柱端弯矩增大系数取值及影响因素研究[D]. 重庆:重庆大学, 2012. Zhang Rui. Research on influence and calculation for moment magnifying coefficients at column ends based on beam hinge mechanism[D]. Chongqing:Chongqing University, 2012. (in Chinese)
[8] 叶列平, 马千里, 缪志伟. 钢筋混凝土框架结构强柱弱梁设计方法的研究[J]. 工程力学, 2010, 27(12):102-113. Ye Lieping, Ma Qianli, Miao Zhiwei. Study on weak beam-strong column design method of RC frame structures[J]. Engineering Mechanics, 2010, 27(12):102-113. (in Chinese)
[9] Dooley K L, Bracci J M. Seismic evaluation of column-to-beam strength ratios in reinforced concrete frames[J]. Structural Journal, 2001, 98(6):843-851.
[10] 王鑫. 既有预应力混凝土框架结构抗震能力评估及相关问题研究[D]. 南京:东南大学, 2010. Wang Xin. Research on seismic capacity evaluation of existing prestressed concrete frame structure and relevant issues[D]. Nanjin:Southeast University, 2010. (in Chinese)
[11] 潘其健. 预制预应力混凝土框架结构抗震能力的试验研究[D]. 南京:东南大学, 2006. Pan Qijian. Experimental study on seismic capacity of precast prestressed concrete frame structures[D]. Nanjin:Southeast University, 2006. (in Chinese)
[12] 冯健, 施明征. 预应力混凝土框架预应力筋的合理配置[J]. 建筑技术开发, 1998, 25(3):14-16. Feng Jian,Shi Mingzheng. Reasonable Configuration of Prestressed Reinforcement in PC Structures[J]. Building Technique Development, 1998, 25(3):14-16. (in Chinese)
[13] 杨红, 孙永炜, 张睿, 等. 基于梁铰机制的柱端弯矩增强措施研究[J]. 土木工程学报, 2014, 47(04):64-74. Yang Hong, Sun Yongwei, Zhang Rui, et al. Study on the moment amplification measures of column ends based on the beam sidesway mechanism[J]. China Civil Engineering Journal, 2014, 47(04):64-74. (in Chinese)
[14] 张瀑, 鲁兆红, 淡浩. 预应力混凝土框架结构实用设计方法[M]. 北京:中国建筑工业出版社, 2012. Zhang Pu, Lu Zhaohong, Dan Hao. The practical design method of PC structures[M]. Beijing:China Architecture and Building Press, 2012. (in Chinese)
[15] 郑文忠, 王英. 预应力混凝土房屋结构设计统一方法与实例[M]. 哈尔滨:黑龙江科学技术出版社, 1998. Zheng Wenzhong, Wang Ying. Unified structure design method and example of PC building[M]. Harbin:Heilongjiang Science and Technology Press, 1998. (in Chinese)
[16] 孟少平. 预应力混凝土框架结构抗震能力及设计方法的研究[D]. 南京:东南大学, 2000. Meng Shaoping. Study on seismic capacity and design method of prestressed concrete frame structures[D]. Nanjin:Southeast University, 2000. (in Chinese)
[17] B1akeley R W G, Park R. Prestressed concrete sections with cyclic flexures[J]. Journal of the Structural Division, ASCE, 1973, 99(8):1717-1742.
[18] 王东超. 罕遇地震作用下预应力混凝土框架结构抗震性能分析[D]. 重庆:重庆大学, 2010. Wang Dongchao. Analysis on seismic performance of prestressed concrete frame structures under rare earthquake[D]. Chongqing:Chongqing University, 2010(in Chinese)
[19] 杜晓菊, 张耀庭, 刘昌芳. 基于纤维模型的钢筋混凝土构件的数值分析[J]. 地震工程与工程振动, 2014, 34(增刊1):548-554. Du xiaoju, Zhang Yaoting, Liu Changfang. The numerical analysis of reinforced concrete members based on fiber model[J]. Earthquake Engineering and Engineering Dynamics, 2014, 34(Suppl1):548-554. (in Chinese)
[20] Vamvatsikos D, Fragiadakis M. Incremental dynamic analysis for estimating seismic performance sensitivity and uncertainty[J]. Earthquake Engineering and Structural Dynamics. 2010, 39(39):141-163.
[21] 周奎, 林杰, 祝文. 基于增量动力分析(IDA)方法的地震易损性工程实例分析[J]. 地震工程与工程振动, 2016, 36(1):135-140. Zhou Kui, Lin Jie, Zhu Wenin. Case study of seismic fragility analysis based on the incremental dynamic analysis (IDA) method[J]. Earthquake Engineering and Engineering Dynamics, 2016, 36(1):135-140. (in Chinese)
[22] Bertero V V. Strength and deformation capacities of buildings under extreme environments[J]. Structural engineering and structural mechanics, 1977, 53(1):29-79.
[23] HAZUS99. Earthquake Loss Estimation Methodology:User's Manual[M]. Washington, DC, USA:Federal Emergency Management Agency, 1999.
[1] ZHANG Yong-liang, FENG Peng-fei, CHEN Xing-chong, NING Gui-xia, DING Ming-bo. Seismic response analysis and seismic performance evaluation on bridge pile foundations based on the method combined static with dynamic analysis [J]. Engineering Mechanics, 2018, 35(S1): 325-329,343.
[2] LU Jie-zhi, ZHANG Yao-ting, GUO Zong-ming, WANG Xiao-wei. SEISMIC FRAGILITY ANALYSIS OF MULTI-STOREY PC FRAME STRUCTURES USING INCREMENTAL DYNAMIC ANALYSIS [J]. Engineering Mechanics, 2017, 34(6): 109-119.
[3] ZHANG Yao-ting, ZHANG Jiang, YANG Li. RESEARCH ON THE EFFECTS OF PRESTRESSING RATIO ON THE SEISMIC CAPACITY OF PRESTRESSED CONCRETE FRAME STRUCTURES [J]. Engineering Mechanics, 2017, 34(2): 129-136.
[4] BAI Jiu-lin, OU Jin-ping. SEISMIC PERFORMANCE EVALUATION OF REINFORCED CONCRETE FRAME STRUCTURES USING THE ENDURANCE TIME METHOD [J]. Engineering Mechanics, 2016, 33(10): 86-96.
[5] SONG Liang-long, GUO Tong. STUDY ON SEISMIC PERFORMANCE OF SELF-CENTERING PRESTRESSED CONCRETE FRAMES WITH WEB FRICTION DEVICES [J]. Engineering Mechanics, 2014, 31(12): 47-56.
[6] JIANG Shao-fei;YANG Bo;WU Zhao-qi. SENSOR ARRANGEMENT METHOD BASED ON VULNERABILITY ANALYSIS FOR A TRUSS BRIDGE [J]. Engineering Mechanics, 2010, 27(增刊Ⅱ): 263-265,.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] CHENG Yong-feng, ZHU Zhao-qing, LU Zhi-cheng, ZHANG Fu-you. THE DYNAMIC RESPONSE OF A SIMPLY SUPPORTED VISCOUSLY DAMPED BEAM SYSTEM UNDER A MOVING HARMONIC OSCILLATOR[J]. Engineering Mechanics, 2018, 35(7): 18 -23 .
[2] XIE Nan, ZHAO Kai, HU Hang, PAN Ming-dong. Error-tolerant optimization design of high falsework[J]. Engineering Mechanics, 2018, 35(S1): 101 -106 .
[3] TANG Ya-jun, TONG Gen-shu, ZHANG Lei. BUCKLING OF PURLINS SUPPORTING STANDING SEAM ROOF WITH ONE SAG-ROD[J]. Engineering Mechanics, 2018, 35(7): 47 -54 .
[4] WANG Pi-guang, ZHAO Mi, DU Xiu-li. EARTHQUAKE INDUCED HYDRODYNAMIC PRESSURE ON ELLIPTICAL CYLINDER SURROUNDED BY COMPRESSIBLE WATER[J]. Engineering Mechanics, 2018, 35(7): 55 -61 .
[5] JI Xiao-dong, CHENG Xiao-wei, XU Meng-chao. Experimental study on tension-shear behavior of low-aspect-ratio RC walls[J]. Engineering Mechanics, 2018, 35(S1): 53 -61 .
[6] BA Zhen-ning, PENG Lin, LIANG Jian-wen, HUANG Di-yang. SCATTER AND DIFFRACTION OF ARBITRARY NUMBER OF HILLS FOR INCIDENT PLANE P-WAVES[J]. Engineering Mechanics, 2018, 35(7): 7 -17,23 .
[7] SUN Shan-shan, ZHAO Jun-hai, HE Shuan-hai, CUI Ying, LIU Yan. DYNAMIC RESPONSE OF CONCRETE-FILLED STEEL TUBE PIERS UNDER BLAST LOADINGS[J]. Engineering Mechanics, 2018, 35(5): 27 -35,74 .
[8] WANG Jing-xuan, WANG Wen-da, LI Hua-wei. REFINED FINITE ELEMENT ANALYSIS OF PROGRESSIVE COLLAPSE OF PLANAR FRAMES WITH CONCRETE-FILLED STEEL TUBULAR COLUMNS[J]. Engineering Mechanics, 2018, 35(6): 105 -114 .
[9] GAO Jia-ming, LIU Bo-quan, HUANG Hua, ZHOU Chang-quan. THEORETICAL ANALYSIS ON THE PROGRESSIVE COLLAPSE OF RC FRAME STRUCTURES WITH SLABS[J]. Engineering Mechanics, 2018, 35(7): 117 -126 .
[10] LIU Zu-qiang, XUE Jian-yang, HAN Chen, YANG Qing-feng. EXPERIMENTAL STUDY ON ASEISMIC PERFORMANCE OF SOLID STEEL REINFORCED CONCRETE T-SHAPED COLUMN[J]. Engineering Mechanics, 2018, 35(5): 17 -26 .