Engineering Mechanics ›› 2018, Vol. 35 ›› Issue (7): 83-93,138.doi: 10.6052/j.issn.1000-4750.2017.03.0195

Previous Articles     Next Articles

EXPERIMENTAL AND ANALYTICAL STUDY OF COMPOSITE STEEL PLATE SHEAR WALL WITH ASSEMBLED MULTI-CONCRETE SLAB

WANG Da-yang, HAN Qi-hao, ZHANG Yong-shan   

  1. School of Civil Engineering, Guangzhou University, Guangzhou, Guangdong 510006, China
  • Received:2017-03-14 Revised:2017-08-01 Online:2018-07-25 Published:2018-07-26

Abstract: The quasi-static test was carried out on composite steel plate shear wall with vertical assembling mode (V-CSPSW), composite steel plate shear wall with horizontal assembling mode (H-CSPSW) and traditional composite steel plate shear wall (CSPSW). The failure characteristic, hysteretic behavior, energy dissipation capability, displacement ductility, stiffness degradation and displacement ductility of the composite walls were analyzed. The numerical model was established by using ABAQUS, and a parametric study was then performed to study the effects of gap width, bolt spacing-to-steel thickness ratio and concrete slab thickness. The results show that the CSPSW assembled by multi-concrete slabs has lower lateral stiffness and energy dissipation capacity, but it can reduce the harmful effects of additional moment generated by the steel plate on frame columns. V-CSPSW is a lateral force resisting member possessing superior seismic performance, its energy dissipation capacity is 1.3 times of that the H-CSPSW has and its stiffness degradation is slower. In order to ensure the composite steel plate shear wall has good lateral resisting capacity, the gap width should be less than 48 mm and 72 mm if the bolt spacing-to-steel thickness ratio is 100 and 125, respectively. The bolt spacing-to-steel thickness ratio of the V-CSPSW should be less than 125 if the concrete slab possesses enough restraint stiffness.

Key words: composite steel plate shear wall, multi-concrete slab, assembling mode, quasi-static test, finite element analysis, gap width, seismic behavior

CLC Number: 

  • TU398+.2
[1] JGJ/T 380-2015, 钢板剪力墙技术规程[S]. 北京:中国建筑工业出版社, 2016. JGJ/T 380-2015, Technical specification for steel plate shear walls[S]. Beijing:China Architecture & Building Press, 2016. (in Chinese)
[2] 郝际平, 孙晓岭, 薛强, 等. 绿色装配式钢结构建筑体系研究与应用[J]. 工程力学, 2017, 34(1):1-13. Hao Jiping, Sun Xiaoling, Xue Qiang, et al. Research and applications of prefabricated steel structure building systems[J]. Engineering Mechanics, 2017, 34(1):1-13. (in Chinese)
[3] Dey S, Bhowmick A K. Seismic performance of composite plate shear walls[J]. Structures, 2016, 6:59-72.
[4] Rahai A, Hatami F. Evaluation of composite shear wall behavior under cyclic loadings[J]. Journal of Constructional Steel Research, 2009, 65(7):1528-1537.
[5] Arabzadeh A, Soltani M, Ayazi A. Experimental investigation of composite shear walls under shear loadings[J]. Thin Walled Structures, 2011, 49(7):842-854.
[6] Guo L H, Li R, Rong Q, et al. Cyclic behavior of SPSW and CSPSW in composite frame[J]. Thin Walled Structures, 2012, 51:39-52.
[7] 李国强, 张晓光, 沈祖炎. 钢板外包混凝土剪力墙抗剪滞回性能试验研究[J]. 工业建筑, 1995, 25(6):32-35. Li Guoqiang, Zhang Xiaoguang, Shen Zuyan. Experimental study on hysteretic behavior of concrete-incased steel plate shear walls[J]. Industrial Construction, 1995, 25(6):32-35. (in Chinese)
[8] Zhao Q H. Experimental and analytical studies of cyclic behavior of steel and composite shear wall systems[D]. Berkeley:University of California, 2006.
[9] Zhao Q H, Astaneh-Asl A. Cyclic behavior of traditional and innovative composite shear wall[J]. Journal of Structural Engineering(ASCE), 2004, 130(2):271-284.
[10] Hitaka T, Matsui C, Tsuda K, et al. Elastic-plastic behavior of building steel frame incorporation steel bearing wall with slits[J]. Journal of Structural & Construction Engineering, 2000, 65(543):153-160.
[11] Hitaka T, Matsui C. Experimental study on steel shear wall with slits[J]. Journal of Structural Engineering. 2003, 129(5):586-595.
[12] 郭彦林, 董全利, 周明, 等. 防屈曲钢板剪力墙滞回性能理论与试验研究[J]. 建筑结构学报, 2009, 30(1):31-39. Guo Yanlin, Dong Quanli, Zhou Ming, et al. Tests and analysis on hysteretic behavior of buckling-restrained steel plate shear wall[J]. Journal of Building Structures, 2009, 30(1):31-39. (in Chinese)
[13] 郭彦林, 周明, 董全利. 防屈曲钢板剪力墙弹塑性抗剪极限承载力与滞回性能研究[J]. 工程力学, 2009, 26(2):108-114. Guo Yanlin, Zhou Ming, Dong Quanli. Hysterestic behavior of buckling-restrained steel plate shear wall[J]. Engineering Mechanics, 2009, 26(2):108-114. (in Chinese)
[14] 郭彦林, 周明, 董全利, 等. 三类钢板剪力墙结构试验研究[J]. 建筑结构学报, 2011, 32(1):17-29. Guo Yanlin, Zhou Ming, Dong Quanli, et al. Experimental study on three types of steel plate shear walls under cyclic loading[J]. Journal of Building Structures, 2011, 32(1):17-29. (in Chinese)
[15] 郭兰慧, 戎芹, 马欣伯, 等. 两边连接钢板-混凝土组合剪力墙抗剪性能试验研究及有限元分析[J]. 建筑结构学报, 2012, 33(6):59-68. Guo Lanhui, Rong Qin, Ma Xinbo, et al. Experimental and analytical study of composite steel plate shear walls connected to frame beams only[J]. Journal of Building Structures, 2012, 33(6):59-68. (in Chinese)
[16] 马欣伯. 两边连接钢板剪力墙及组合剪力墙抗震性能研究[D]. 哈尔滨:哈尔滨工业大学, 2009. Ma Xinbo. Seismic behavior of steel plate shear walls and composite shear walls with two-side connections[D]. Harbin:Harbin Institute of Technology, 2009. (in Chinese)
[17] Guo L H, Rong Q, Ma X B. Analysis of composite steel plate shear walls connected with frame beams only[J]. Structures and Buildings, 2013, 166(9):507-518.
[18] Guo L H, Ma X B, Li R. Experimental research on seismic behavior of C-SPSWs connected to frame beams[J]. Earthquake Engineering and Engineering Vibration, 2011, 10(1):65-73.
[19] Guo L H, Rong Q, Qu B. Testing of steel plate shear walls with composite columns and infill plates connected to beams only[J]. Engineering Structures, 2017, 136:165-179.
[20] 陆烨, 李国强, 孙飞飞. I形大高宽比屈曲约束钢板剪力墙的试验和理论研究[J]. 土木工程学报, 2011, 44(10):45-52. Lu Ye, LI Guoqiang, Sun Feifei. Experimental and theoretical study on slim I-shape buckling-restrained steel plate shear walls[J]. China Civil Engineering Journal, 2011, 44(10):45-52. (in Chinese)
[21] 刘青, 李国强, 陆烨. 内嵌屈曲约束钢板剪力墙钢框架的性能参量及计算方法[J]. 工程力学, 2016, 33(10):105-115. Liu Qing, Li Guoqiang, Lu Ye. Mechanical properties and calculation of the buckling restrained steel plate shear walls embedded steel frame[J]. Engineering Mechanics, 2016, 33(10):105-115. (in Chinese)
[22] 郭彦林, 董全利, 周明. 防屈曲钢板剪力墙弹性性能及混凝土盖板约束刚度研究[J]. 建筑结构学报, 2009, 30(1):40-47. Guo Yanlin, Dong Quanli, Zhou Ming. Elastic behavior and minimum restraining stiffness of buckling restrained steel plate shear wall[J]. Journal of Building Structures, 2009, 30(1):40-47. (in Chinese)
[1] SHANG Qing-xue, LI Ze, LIU Rui-kang, WANG Tao. Experimental study on properties of aseismic braces used in pipe line systems [J]. Engineering Mechanics, 2018, 35(S1): 120-125,133.
[2] XU Chun-yi, LU Biao, YU Xi. Experimental study on the seismic behavior of masonry wall with fiberglass geogrid [J]. Engineering Mechanics, 2018, 35(S1): 126-133.
[3] WANG Bing, YOU Hong-xu, LIU Xiao. Working mechanism analysis of steel reinforced recycled aggregate concrete beams after high temperature [J]. Engineering Mechanics, 2018, 35(S1): 161-165,180.
[4] ZHANG Wei-jing, ZHANG Chen-cheng. Non-linear analysis of precast RC column with steel bars spliced by compressive sleeves [J]. Engineering Mechanics, 2018, 35(S1): 67-72.
[5] YANG Zhi-jian, LEI Yue-qiang, TAN Ya-wen, LI Guo-chang, WANG Jing-ming. Mechanical performance of improved PHC pile-to-pile cap connection [J]. Engineering Mechanics, 2018, 35(S1): 223-229.
[6] ZHENG Shan-suo, ZHANG Xiao-hui, HUANG Wei-zeng, ZHAO Xu-ran. EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON THE SEISMIC BEHAVIOR OF CORRODED PLANE STEEL FRAMES UNDER OFFSHORE ATMOSPHERIC ENVIRONMENT [J]. Engineering Mechanics, 2018, 35(7): 62-73,82.
[7] HAN Qiang, JIA Zhen-lei, WANG Xiao-qiang, HUANG Chao. BEHAVIOR TEST AND RESTORING FORCE MODEL OF DISC-SPRING SELF-CENTERING BUCKLING-RESTRAINED BRACES [J]. Engineering Mechanics, 2018, 35(6): 144-150,190.
[8] WANG Jing-xuan, WANG Wen-da, LI Hua-wei. REFINED FINITE ELEMENT ANALYSIS OF PROGRESSIVE COLLAPSE OF PLANAR FRAMES WITH CONCRETE-FILLED STEEL TUBULAR COLUMNS [J]. Engineering Mechanics, 2018, 35(6): 105-114.
[9] ZHAO Lin, ZHAN Yan-yan, CHEN Xu, GE Yao-jun. WIND-INDUCED INTERFERENCE CRITERION FOR GROUPED COOLING TOWERS BASED ON THE INDEX OF REINFORCEMENT RATIO ENVELOPE [J]. Engineering Mechanics, 2018, 35(5): 65-74.
[10] WANG Ni, CHEN Zong-ping, CHEN Yu-liang. ANALYSIS ON SEISMIC PERFORMANCE OF STEEL REINFORCED CONCRETE L-SHAPED COLUMN SPACE CORNER JOINTS [J]. Engineering Mechanics, 2018, 35(5): 180-192.
[11] ZHENG Shan-suo, LIU Wei, ZUO He-shan, DONG Li-guo, LI Qiang-qiang. ASEISMIC PERFORMANCE TEST OF RC FRAME BEAMS CONSIDERING CORROSION WITH DIFFERENT SHEAR SPAN RATIO IN THE COASTAL ATMOSPHERE [J]. Engineering Mechanics, 2018, 35(4): 78-86.
[12] CHONG Xun, WAN Jin-liang, JIANG Qing, YE Xian-guo, WANG De-cai, XING Wei, SHAO Hui-bin. EXPERIMENTAL STUDY ON ASEISMIC PERFORMANCE OF SUPERIMPOSED RC WALLS WITH ENHANCED HORIZONTAL JOINTS [J]. Engineering Mechanics, 2018, 35(4): 107-114.
[13] MOU Ben, WANG Ling-ling, ZHANG Chun-wei, LIN Xu-chuan. ASEISMIC PERFORMANCE OF BEAM-TO-COLUMN JOINTS WITH EXTERNAL-DIAPHRAGM CONSIDERING SLAB EFFECT: EXPERIMENTAL INVESTIGATION [J]. Engineering Mechanics, 2018, 35(2): 160-168,213.
[14] ZHENG Shan-suo, LIU Wei, QIN Qing, ZHANG Chuan-chao, DONG Li-guo, LI Qiang-qiang. EXPERIMENTAL RESEARCH ON SEISMIC BEHAVIOR OF RC FRAME BEAMS UNDER DIFFERENT LOADING PROTOCOLS [J]. Engineering Mechanics, 2018, 35(1): 109-117.
[15] LIANG Xing-wen, YANG Peng-hui, HE Wei, XIN Li, LI Lin. EXPERIMENTAL STUDY ON ASEISMIC BEHAVIOR OF REINFORCED CONCRETE FRAME-ENERGY DISSIPATION WALLS MADE WITH HIGH PERFORMANCE FIBER REINFORCED CONCRETE [J]. Engineering Mechanics, 2018, 35(1): 209-218.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] CHENG Yong-feng, ZHU Zhao-qing, LU Zhi-cheng, ZHANG Fu-you. THE DYNAMIC RESPONSE OF A SIMPLY SUPPORTED VISCOUSLY DAMPED BEAM SYSTEM UNDER A MOVING HARMONIC OSCILLATOR[J]. Engineering Mechanics, 2018, 35(7): 18 -23 .
[2] JIA Ming-ming, ZHOU Zhou, LÜ Da-gang, YANG Ning. Seismic failure modes and seismic behavior analysis of rocking truss-BRB-steel frame systems[J]. Engineering Mechanics, 2018, 35(S1): 73 -79 .
[3] XIE Nan, ZHAO Kai, HU Hang, PAN Ming-dong. Error-tolerant optimization design of high falsework[J]. Engineering Mechanics, 2018, 35(S1): 101 -106 .
[4] TANG Ya-jun, TONG Gen-shu, ZHANG Lei. BUCKLING OF PURLINS SUPPORTING STANDING SEAM ROOF WITH ONE SAG-ROD[J]. Engineering Mechanics, 2018, 35(7): 47 -54 .
[5] WANG Pi-guang, ZHAO Mi, DU Xiu-li. EARTHQUAKE INDUCED HYDRODYNAMIC PRESSURE ON ELLIPTICAL CYLINDER SURROUNDED BY COMPRESSIBLE WATER[J]. Engineering Mechanics, 2018, 35(7): 55 -61 .
[6] HONG Yue, TANG Zhen-yun, LIN Shu-chao, LI Zhen-bao. Experimental study on mechanical properties of a new type of VCFPB[J]. Engineering Mechanics, 2018, 35(S1): 113 -119 .
[7] ZHU Bai-jie, ZHANG Ling-xin, WANG Tao. Tests on the mechanical behavior of steel shear panel dampers under axial loads[J]. Engineering Mechanics, 2018, 35(S1): 140 -144 .
[8] ZHAO Bao-qing, WANG Qi-ming, LI Zhi-heng, LEI Zheng. Performance research of FAST ring beam by theoretical and experimental[J]. Engineering Mechanics, 2018, 35(S1): 200 -204,211 .
[9] JIANG Zhi-lin, ZHAO Jun-hai, LÜ Mei-tong, ZHANG Lei. Unified solution of limit internal pressure for double-layered thick-walled cylinder based on bilinear hardening model[J]. Engineering Mechanics, 2018, 35(S1): 6 -12 .
[10] JI Xiao-dong, CHENG Xiao-wei, XU Meng-chao. Experimental study on tension-shear behavior of low-aspect-ratio RC walls[J]. Engineering Mechanics, 2018, 35(S1): 53 -61 .