Engineering Mechanics ›› 2012, Vol. 29 ›› Issue (1): 70-80.doi: 10.6052/j.issn.1000-4750.2010.04.0278

Previous Articles     Next Articles

DEVELOPMENT AND APPLICATION OF STEEL-CONCRETE COMPOSITE FIBER BEAM MODEL IN ABAQUS PLATFORM

NIE Jian-guo1,2, WANG Yu-hang1,2   

  1. 1. Department of Civil Engineering, Tsinghua University, Beijing 100084, China;2. Key Laboratory of Civil Engineering Safety and Durability of China Education Ministry, Beijing 100084, China
  • Received:2010-04-19 Revised:2010-07-16 Online:2012-01-25 Published:2012-01-25

Abstract:

A steel-concrete composite fiber beam model is developed in this paper, which can divide the composite sections into fibers and the user-defined uniaxial hysteretic material constitutive model can be incorporated in subprogram UMAT provided by ABAQUS. The steel-concrete composite fiber beam model can be used to perform global elasto-plastic analysis of composite frames with full connections subjected to the combined action of gravity and cyclic lateral loads. The model is verified through a number of experiments showing that the composite fiber beam model developed by authors possesses good accuracy and wide applicability compared with the traditional finite element model. Although the fiber beam model neglects the slip between steel beam and concrete slab, the accuracy of global predictions of steel-concrete composite frames is not affected. So the developed steel-concrete fiber beam model possesses modelling simplicity and calculation efficiency, and is suitable for the seismic analysis of steel-concrete composite frames.

Key words: steel-concrete, composite structure, fiber beam, ABAQUS, UMAT, finite element

CLC Number: 

  • TU398+.9
[1] ZHAO Bao-qing, WANG Qi-ming, LI Zhi-heng, LEI Zheng. Performance research of FAST ring beam by theoretical and experimental [J]. Engineering Mechanics, 2018, 35(S1): 200-204,211.
[2] WANG Bing, YOU Hong-xu, LIU Xiao. Working mechanism analysis of steel reinforced recycled aggregate concrete beams after high temperature [J]. Engineering Mechanics, 2018, 35(S1): 161-165,180.
[3] ZHANG Wei-jing, ZHANG Chen-cheng. Non-linear analysis of precast RC column with steel bars spliced by compressive sleeves [J]. Engineering Mechanics, 2018, 35(S1): 67-72.
[4] YANG Zhi-jian, LEI Yue-qiang, TAN Ya-wen, LI Guo-chang, WANG Jing-ming. Mechanical performance of improved PHC pile-to-pile cap connection [J]. Engineering Mechanics, 2018, 35(S1): 223-229.
[5] ZHAO Zhi, DAI Kao-shan, MAO Zhen-xi, ZHANG Cai-wei. Failure analyses of a wind turbine tower under ground motions with different frequency characteristics [J]. Engineering Mechanics, 2018, 35(S1): 293-299.
[6] ZHENG Shan-suo, ZHANG Xiao-hui, HUANG Wei-zeng, ZHAO Xu-ran. EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON THE SEISMIC BEHAVIOR OF CORRODED PLANE STEEL FRAMES UNDER OFFSHORE ATMOSPHERIC ENVIRONMENT [J]. Engineering Mechanics, 2018, 35(7): 62-73,82.
[7] WANG Da-yang, HAN Qi-hao, ZHANG Yong-shan. EXPERIMENTAL AND ANALYTICAL STUDY OF COMPOSITE STEEL PLATE SHEAR WALL WITH ASSEMBLED MULTI-CONCRETE SLAB [J]. Engineering Mechanics, 2018, 35(7): 83-93,138.
[8] XIE Jiang, ZHANG Xue-han, SU Xuan, MOU Hao-lei, ZHOU Jian, FENG Zhen-yu, LAN Yuan-pei. INFLUENCE OF LAYER SEQUENCE ON ENERGY ABSORPTION CHARACTERISTICS OF THIN-WALLED COMPOSITE CIRCULAR TUBES UNDER AXIAL COMPRESSION [J]. Engineering Mechanics, 2018, 35(6): 231-239.
[9] WANG Jing-xuan, WANG Wen-da, LI Hua-wei. REFINED FINITE ELEMENT ANALYSIS OF PROGRESSIVE COLLAPSE OF PLANAR FRAMES WITH CONCRETE-FILLED STEEL TUBULAR COLUMNS [J]. Engineering Mechanics, 2018, 35(6): 105-114.
[10] ZHAO Lin, ZHAN Yan-yan, CHEN Xu, GE Yao-jun. WIND-INDUCED INTERFERENCE CRITERION FOR GROUPED COOLING TOWERS BASED ON THE INDEX OF REINFORCEMENT RATIO ENVELOPE [J]. Engineering Mechanics, 2018, 35(5): 65-74.
[11] WANG Ni, CHEN Zong-ping, CHEN Yu-liang. ANALYSIS ON SEISMIC PERFORMANCE OF STEEL REINFORCED CONCRETE L-SHAPED COLUMN SPACE CORNER JOINTS [J]. Engineering Mechanics, 2018, 35(5): 180-192.
[12] WANG Shan. A STRESS RECOVERY METHOD FOR CRACKS IN KIRCHHOFF PLATE BASED ON THE SYMPLECTIC EIGENSOLUTIONS NEAR THE CRACK TIPS [J]. Engineering Mechanics, 2018, 35(5): 10-16.
[13] ZHAO Xiao-gang, ZHAO Xin, WEN Ze-feng, JIN Xue-song. INFLUENCE OF WHEEL-RAIL ADHESION COEFFICIENT ON TRANSIENT PROPAGATION OF A VERTICAL RAIL CRACK [J]. Engineering Mechanics, 2018, 35(5): 239-245.
[14] HONG Jun-qing, LIU Wei-qing, FANG Hai, ZHANG Fu-bin. STRESS ANALYSIS OF COMPOSITE SANDWICH PANELS UNDER UNIDIRECTIONAL BENDING [J]. Engineering Mechanics, 2018, 35(4): 41-51.
[15] LI Yong-le, WANG Lei, XIANG Huo-yue, CHEN Xin-zhong. A COMPUTATIONAL METHOD OF TORSIONAL INERTIA FOR PLATE TRUSS GIRDERS [J]. Engineering Mechanics, 2018, 35(3): 125-131.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] YUAN Yuan;;XU Ying-qiang;LU Guo-zhi;ZHU Xian-fei. NUMERICAL METHOD FOR RESIDUAL STRESS OF GEAR IN SHAKEDOWN[J]. Engineering Mechanics, 2008, 25(10): 0 -211, .
[2] XING De-jin;LI Zhong-xian. FUZZY CONTROL OF STRUCTURES USING SMA SMART DAMPER[J]. Engineering Mechanics, 2008, 25(10): 0 -228, .
[3] ZHOU Xiao-ping;YANG Hai-qing;ZHANG Yong-xing. ELASTOPLASTIC ANALYSIS OF A FINITE PLATE WITH AN ECCENTRIC CRACK LOADED BY TWO PAIRS OF CONCENTRATED TENSILE FORCES[J]. Engineering Mechanics, 2008, 25(1): 0 -027 .
[4] GONG Yao-qing;BAO Shi-hua. A NEW METHOD FOR FREE VIBRATION ANALYSIS OF SPACE MEGA FRAME OF SUPER TALL BUILDINGS[J]. Engineering Mechanics, 2008, 25(10): 0 -140 .
[5] LIU Jin-xing;DENG Shou-chun;ZHANG Jing;LIANG Nai-gang. BEAM LATTICE MODELING FOR THE FRACTURE OF PARTICLE COMPOSITES[J]. Engineering Mechanics, 2008, 25(10): 0 -037 .
[6] LANG Feng-chao;XING Yong-ming;ZHU Jing. THE MECHANICAL PROPERTIES OF 316L STAINLESS STEEL AFTER SURFACE NANOSTRUCTURE TREATMENT USING NANOINDENTATION[J]. Engineering Mechanics, 2008, 25(10): 0 -071 .
[7] GUO Xiao-gang;;LIU Ren-huai;ZENG Na;JIN Xing. THE MODIFICATION ON SPACE CONFIGURATION OF FLEXIBLE PIPE BY THE SUB-STRUCTURE DISPLACEMENT ITERATION METHOD[J]. Engineering Mechanics, 2008, 25(10): 0 -032 .
[8] XING Jing-zhong;LIU Chun-tu. BUCKLING ANALYSIS OF SPANNING PIPE BURIED IN LINEAR ELASTIC SOIL[J]. Engineering Mechanics, 2008, 25(10): 0 -075 .
[9] LIU Xiang-qing;LIU Jing-bo. TIME HISTORY ANALYSIS OF ELASTO-PLASTIC SEISMIC RESPONSE OF A SUBWAY STATION STRUCTURE WITH ARCHED CROSS SECTION BASED ON FIBER MODEL[J]. Engineering Mechanics, 2008, 25(10): 0 -157 .
[10] HAO Qing-duo;WANG Yan-lei;HOU Ji-lin;OU Jin-ping;. EXPERIMENTAL STUDY ON BOND BEHAVIOR OF GFRP RIBBED REBARS[J]. Engineering Mechanics, 2008, 25(10): 0 -165, .