工程力学 ›› 2017, Vol. 34 ›› Issue (5): 68-77.doi: 10.6052/j.issn.1000-4750.2015.12.0960

• 土木工程学科 • 上一篇    下一篇

偏心钢结构节点梁柱-核心区受力机理研究

施正捷, 李全旺, 樊健生   

  1. 清华大学土木工程系, 北京 100084
  • 收稿日期:2015-12-02 修回日期:2016-03-16 出版日期:2017-05-25 发布日期:2017-05-25
  • 通讯作者: 樊健生(1975-),男,山东东营人,教授,博士,主要从事组合结构研究(E-mail:fanjsh@tsinghua.edu.cn).
  • 作者简介:施正捷(1990-),男,浙江人,博士生,主要从事组合结构研究(E-mail:shizhengjie08@gmail.com);李全旺(1975-),男,天津宝坻人,副教授,博士,主要从事工程力学研究(E-mail:li_quanwang@tsinghua.edu.cn).
  • 基金资助:
    国家自然科学基金项目(51222810)

INTERACTION EFFECT BETWEEN A BEAM OR COLUMN AND THE CORE AREA OF AN ECCENTRIC STEEL JOINT

SHI Zheng-jie, LI Quan-wang, FAN Jian-sheng   

  1. Department of Civil Engineering, Tsinghua University, Beijing 100084, China
  • Received:2015-12-02 Revised:2016-03-16 Online:2017-05-25 Published:2017-05-25
  • Contact: 10.6052/j.issn.1000-4750.2015.12.0960

摘要: 某些工程处于建筑布置和使用的需要而采用钢结构偏心连接节点。偏心节点由于受到扭转作用,而在节点核心区产生较为明显的应力集中。该文借助有限元模型,对偏心连接梁-柱钢结构节点的受力特征进行分析,表明偏心节点核心区存在明显的三维扭转效应,以及梁柱截面的畸变翘曲效应。在受力特征分析的基础上,提出了钢结构偏心节点核心区的耦合效应计算模型。通过与有限元模型进行比对验证和参数分析,对梁柱截面畸变角函数进行修正和标定。分析表明,该文提出的偏心节点核心区耦合效应分析方法能够较准确计算梁柱截面畸变翘曲正应力与弯曲正应力,可供设计参考。

关键词: 钢结构, 偏心节点, 受力机理分析, 扭转, 畸变

Abstract: Eccentric beam-column steel joints can be used to enhance the flexibility of building layouts. However, the eccentricity can cause stress concentrations, and has a negative influence on the mechanical properties of the joints. This paper presents a study of the mechanical performance of steel eccentric beam-column joints using FE models. The three dimension torsion effect is proved to exist in eccentric steel joints, while distortion and warping is observed to exist in sections of the beams and columns. A series of simplified assumptions were made based on the mechanical performance analysis, and a model focusing on the interaction effect between the beam or column and the core area of the eccentric joint is proposed. The simplified assumptions of the model were compared with the mechanical performance obtained from the FE models, and a revised coefficient is adopted for the distortion angle in order to coincide with the character of the distortion angle in the FE models. The proposed model in this paper is accurate when predicting the ratio of the distortion warping stress and the bending stress.

Key words: steel structure, eccentric joints, mechanical performance, torsion, distortion

中图分类号: 

  • TU391
[1] 林海, 李赞恒, 江民, 等. 某超高层建筑结构体系和关键设计研究[J]. 建筑结构, 2014, 44(24): 31-36. Lin Hai, Richard Lee, Kang Man, et al. Research on structural system and key issues design of a super-tall building [J]. Building Structure, 2014, 44(24): 31-36. (in Chinese)
[2] Chen W F, Newlin D E. Column web strength in beam-to-column connection [J]. Journal of the Structural Division, 1973, 99(9): 1978-1984.
[3] 王萌, 石永久, 王元清, 等. 循环荷载下钢材本构模型的应用研究[J]. 工程力学, 2013, 30(7): 212-218. Wang Meng, Shi Yongjiu, Wang Yuanqing, et al. Application study on cyclic constitutive model of steel [J]. Engineering Mechanics, 2013, 30(7): 212-218. (in Chinese)
[4] Shi Yongjiu, Wang Meng, Wang Yuanqing. Analysis of seismic behavior of welded steel connections and frames with differently constructed connections [J]. Advances in Structural Engineering, 2012, 15(7): 1053-1068.
[5] Schneider S P, Amidi A. Seismic behavior of steel frames with deformable panel zones [J]. Journal of Structural Engineering, 1998, 124(1): 35-42.
[6] Ricles J M, Mao C, Lu L, et al. Inelastic cyclic testing of welded unreinforced moment connections [J]. Journal of Structural Engineering, 2002, 128(4): 429-440.
[7] European Committee for Standardization (CEN). Eurocode 3: Design of Steel Structures. Part 1-1: General rules and rules for buildings [S]. EN 1993-1-1, Brussels, Belgium, 2005.
[8] Faella C, Piluso V, Rizzano G. Structural steel semirigid connections: Theory, design, and software [M]. Boca Raton, Fla.: CRC Press, 1999: 45-55.
[9] 周蓓蕾, 穆继昌, 江民, 等. 某总部塔楼梁柱偏心钢节点研究[J]. 建筑结构, 2014, 44(24): 116-121. Zhou Beilei, Mu Jichang, Kang Man, et al. Study on eccentric steel joints of a headquarters tower [J]. Building Structure, 2014, 44(24): 116-121. (in Chinese)
[10] 张远海, 林丽霞. 偏心轴向荷载作用下薄壁箱梁的约束扭转翘曲应力研究[J]. 工程力学, 2013, 30(3): 32-36. Zhang Yuanhai, Lin Lixia. Research on warping stress of restrained torsion for thin-walled box girder under eccentric axial load [J]. Engineering Mechanics, 2013, 30(3): 32-36. (in Chinese)
[11] 童根树, 倪闻昊. 框架梁柱节点处双力矩与翘曲位移的关系[J]. 工程力学, 2013, 30(1): 112-118. Tong Genshu, Ni Wenhao. The relationship between bimoments and beam-column joint warping displacements [J]. Engineering Mechanics, 2013, 30(1): 112-118. (in Chinese)
[12] 鲍永方, 黄文彬. 矩形箱梁约束扭转理论的分析与比较[J]. 工程力学, 1997, 14(3): 132-137. Bao Yongfang, Huang Wenbin. Analysis and comparision of restrained torsion theories for rectangular box-shaped beam [J]. Engineering Mechanics, 1997, 14(3): 132-137. (in Chinese)
[13] 谢旭, 黄剑源. 翘曲畸变和剪滞效应的空间分析[J]. 土木工程学报, 1995, 28(4): 3-14. Xie Xu, Huang Jianyuan. Three dimensional analysis for warping, distortion and shear lag effect of thin-walled box girder bridge under restrained torsion [J]. China Civil Engineering Journal, 1995, 28(4): 3-14. (in Chinese)
[14] 韦成龙, 曾庆元. 薄壁曲线箱梁考虑翘曲、畸变和剪滞效应的空间分析[J]. 土木工程学报, 2000, 33(6): 81-87. Wei Chenglong, Zeng Qingyuan. A new element for thin for thin-walled curved box girder analysis including warping distortion and shear-lag effects [J]. China Civil Engineering Journal, 2000, 33(6): 81-87. (in Chinese)
[15] 徐勋, 强士中. 薄壁箱梁畸变分析理论的研究[J]. 工程力学, 2013, 30(11): 192-201. Xu Xun, Qiang Shizhong. Research on distortion analysis theory of thin-walled box girder [J]. Engineering Mechanics, 2013, 30(11): 192-201. (in Chinese)
[16] 张元海, 林丽霞. 一种考虑剪滞效应的斜支承连续箱梁挠曲扭转分析方法[J]. 工程力学, 2012, 29(2): 94-100. Zhang Yuanhai, Lin Lixia. A method considering shear lag effect for flexural-torsion analysis of skewly supported continuous box girder [J]. Engineering Mechanics, 2012, 29(2): 94-100. (in Chinese)
[1] 岳子翔, 温庆杰, 卓涛. 半开式桁架桥结构稳定性分析[J]. 工程力学, 2018, 35(S1): 270-277.
[2] 张立红, 胡晓, 曾迪, 周德才, 毛宇, 吕玮. 基于抗震性能的高烈度区高端阀厅选型研究[J]. 工程力学, 2018, 35(S1): 320-324.
[3] 张爱林, 张勋, 刘学春, 王琦. 钢框架-装配式两边连接薄钢板剪力墙抗震性能试验研究[J]. 工程力学, 2018, 35(9): 54-63,72.
[4] 施刚, 王珣, 高阳, 张勇. 国产低屈服点钢材循环加载试验研究[J]. 工程力学, 2018, 35(8): 30-38.
[5] 唐亚军, 童根树, 张磊. 设有单根拉条滑动座连接檩条的稳定性分析[J]. 工程力学, 2018, 35(7): 47-54.
[6] 尹飞, 周晖, 王元清, 廖小伟, 杨璐. A572 Gr.50厚板对接焊缝断裂性能研究[J]. 工程力学, 2018, 35(6): 42-51.
[7] 李天, 晁进涛, 樊嘉. 等腰三角形空间桁架自由扭转理论分析和试验研究[J]. 工程力学, 2018, 35(5): 223-230,238.
[8] 王元清, 顾浩洋, 廖小伟. 钢结构角焊缝抗剪疲劳性能的试验研究[J]. 工程力学, 2018, 35(4): 61-68.
[9] 黄维, 钱江, 周知. 竖向混合结构转换柱构件抗剪承载力研究[J]. 工程力学, 2018, 35(4): 96-106.
[10] 乔朋, 狄谨, 秦凤江. 单箱多室波形钢腹板组合箱梁的腹板剪应力分析[J]. 工程力学, 2017, 34(7): 97-107.
[11] 童根树, 冯一笑, 张磊. 受弯Z形檩条畸变屈曲与整体屈曲统一分析方法[J]. 工程力学, 2017, 34(5): 116-124,131.
[12] 陈学森, 施刚, 赵俊林, 郁汉明, 魏东. 基于组件法的超大承载力端板连接节点弯矩-转角曲线计算方法[J]. 工程力学, 2017, 34(5): 30-41.
[13] 王元清, 廖小伟, 周晖, 石永久, 陈健陵, 叶国平. 基于SINTAP-FAD方法的含裂纹缺陷钢结构构件安全性评定研究[J]. 工程力学, 2017, 34(5): 42-51.
[14] 岑松, 尚闫, 周培蕾, 周明珏, 包屹, 黄峻彬, 吴承晋, 李智. 形状自由的高性能有限元方法研究的一些进展[J]. 工程力学, 2017, 34(3): 1-14.
[15] 黄小宁, 杜永峰, 李慧. 平面不规则RC框剪结构基于性能的减震设计方法[J]. 工程力学, 2017, 34(3): 68-75.
Viewed
Full text


Abstract

Cited

  Shared   
  Discussed   
[1] 原 园;徐颖强;吕国志;朱贤飞. 齿轮啮合过程中安定状态残余应力的数值方法研究[J]. 工程力学, 2008, 25(10): 0 -211, .
[2] 邢德进;李忠献. 应用SMA智能阻尼器的结构模糊控制[J]. 工程力学, 2008, 25(10): 0 -228, .
[3] 周小平;杨海清;张永兴. 有限宽偏心裂纹板在裂纹面受两对集中拉力作用时裂纹线的弹塑性解析解[J]. 工程力学, 2008, 25(1): 0 -027 .
[4] 龚耀清;包世华. 超高层建筑空间巨型框架自由振动计算的新方法[J]. 工程力学, 2008, 25(10): 0 -140 .
[5] 刘金兴;邓守春;张 晶;梁乃刚. 颗粒复合材料断裂的梁网格模型[J]. 工程力学, 2008, 25(10): 0 -037 .
[6] 郎风超;邢永明;朱 静. 应用纳米压痕技术研究表面纳米化后316L 不锈钢力学性能[J]. 工程力学, 2008, 25(10): 0 -071 .
[7] 郭小刚;刘人怀;曾 娜;金 星. 子结构位移迭代法修正软管空间形态[J]. 工程力学, 2008, 25(10): 0 -032 .
[8] 邢静忠;柳春图. 线弹性土壤中埋设悬跨管道的屈曲分析[J]. 工程力学, 2008, 25(10): 0 -075 .
[9] 刘祥庆;刘晶波. 基于纤维模型的拱形断面地铁车站结构弹塑性地震反应时程分析[J]. 工程力学, 2008, 25(10): 0 -157 .
[10] 郝庆多;王言磊;侯吉林;欧进萍;. GFRP带肋筋粘结性能试验研究[J]. 工程力学, 2008, 25(10): 0 -165, .
X

近日,本刊多次接到来电,称有不法网站冒充《工程力学》杂志官网,并向投稿人收取高额费用。在此,我们郑重申明:

1.《工程力学》官方网站是本刊唯一的投稿渠道(原网站已停用),《工程力学》所有刊载论文必须经本刊官方网站的在线投稿审稿系统完成评审。我们不接受邮件投稿,也不通过任何中介或编辑收费组稿。

2.《工程力学》在稿件符合投稿条件并接收后会发出接收通知,请作者在接到版面费或审稿费通知时,仔细检查收款人是否为“《工程力学》杂志社”,千万不要汇款给任何的个人账号。请广大读者、作者相互转告,广为宣传!如有疑问,请来电咨询:010-62788648。

感谢大家多年来对《工程力学》的支持与厚爱,欢迎继续关注我们!

《工程力学》杂志社

2018年11月15日